994K Wheel Loader Engine Supplement Caterpillar


Primary Fuel Filter, Water Separator and Base - Remove and Install

Usage:

994K MM9

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




Illustration 1g06140768


Illustration 2g06140770


Illustration 3g06140771


Illustration 4g06140780

Installation Procedure

  1. Install the primary fuel filter, water separator and base in the reverse order of removal.

Caterpillar Information System:

988K XE Wheel Loader Systems Relief Valve
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems System Pressure - Release
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Oil Accumulator - Test and Charge
745 & 740 GC Articulated Truck Hydraulic Tank
745 & 740 GC Articulated Truck Hoist Control Valve
CS44B Vibratory Soil Compactor Machine Systems Leveling Blade System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Steering System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Vibratory System Troubleshooting
CS44B Vibratory Soil Compactor Machine Systems Visual Inspection
CS44B Vibratory Soil Compactor Machine Systems Machine Preparation for Troubleshooting
CS44B Vibratory Soil Compactor Propel Systems Propel System Troubleshooting
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Cat ET List Management
994K Wheel Loader Engine Supplement Secondary Fuel Filter and Base - Remove and Install
994K Wheel Loader Machine Systems Grease Tank (Automatic Lubrication) - Remove and Install
U-Cup Seal in the Cylinder Group May Fail on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102, 7555} U-Cup Seal in the Cylinder Group May Fail on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102, 7555}
CAT Synthetic Gear Oil 75W-140 Is Now Available in Quart Size for Certain CAT Products {3080} CAT Synthetic Gear Oil 75W-140 Is Now Available in Quart Size for Certain CAT Products {3080}
A New Bulk Hose Clamp is Now Used in Multiple Hydraulic Groups on Certain 789D, 789D XQ, 793D, and 793F Off-Highway Trucks {5057, 5057} A New Bulk Hose Clamp is Now Used in Multiple Hydraulic Groups on Certain 789D, 789D XQ, 793D, and 793F Off-Highway Trucks {5057, 5057}
994K Wheel Loader Machine Systems Monitor - Remove and Install - Side
2570D and 2670D Wheel Feller Buncher Power Train Tire and Rim (Rear) - Remove and Install
2570D and 2670D Wheel Feller Buncher Power Train Flexible Coupling - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Backflow Valve - Test
Location and Use of the Front Door Jumper Plug for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7301} Location and Use of the Front Door Jumper Plug for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7301}
986H Wheel Loader Machine Systems Lift Position Sensor and Mounting
986H Wheel Loader Machine Systems Hydraulic Oil Cooler
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.