3500 Engines for Caterpillar Built Generator Sets Caterpillar


Camshaft

Usage:

776C 2TK



图 1g00889902



图 2g00290053

(1) 销

销会从左后凸轮轴处伸出以下距离: ... 12.0 ± 0.5 mm (0.47 ± 0.02 in)

(2) 垫圈

新垫圈的厚度 ... 8.50 ± 0.05 mm (0.335 ± 0.002 in)
新凸轮轴中凹槽的厚度 ... 8.75 ± 0.05 mm (0.344 ± 0.002 in)
新凸轮轴的端隙 ... 0.15 至 0.35 mm (0.006 至 0.014 in)

(3) 左凸轮轴

(4) 右凸轮轴

(5) 轴颈表面

新凸轮轴轴承表面(轴颈)的直径 ... 85.88 ± 0.02 mm (3.381 ± 0.001 in)
组装后的凸轮轴轴承孔孔径 ... 86.00 ± 0.06 mm (3.386 ± 0.002 in)

(6) 凸轮轴凸轮高度

请使用以下步骤来确定这一高度:

  1. 测量凸轮轴凸轮高度 (6) 。

  1. 测量基圆 (8) 。

  1. 用凸轮高度(步骤 2)减去基圆(步骤 1)。 二者之差即为实际凸轮升程。

  1. 规定的凸轮轴凸轮升程 (7)

    进气凸轮 ... 9.314 mm (0.3667 in)

    喷油器凸轮 ... 13.731 mm (0.5406 in)

    排气凸轮 ... 9.078 mm (0.3574 in)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.