980L Tier 3 Wheel Loader Machine System Caterpillar


Counterweight - Remove and Install

Usage:

980L D8Z

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
439-3939  Link Bracket As 


    Illustration 1g06086210

  1. Remove bolts (2) from counterweight (1).


    Illustration 2g06086211

  2. Remove light assembly (3) and (4).


    Illustration 3g06086212

  3. Disconnect harness assembly (5) and (6).


    Illustration 4g06086214

  4. Attach Tooling (A) and a suitable lifting device to counterweight (1). The weight of counterweight (1) is approximately 1594 kg (3514 lb).

    Note: The actual weight of the counterweight may vary due to specific machine configuration. The counterweight shown is in the standard configuration.

  5. Remove bolts (7) from both sides of counterweight (1) and lower counterweight (1) to the ground.

Installation Procedure

  1. Install the counterweight in the reverse order of removal procedure.

Caterpillar Information System:

725C Articulated Truck Suspension System - Check
PG145 Transmission Transmission Case
14L Motor Grader Implement Electronic Control System MID 082 - CID 3284 - FMI 03
793F Tier IV Off-Highway Truck Field Assembly Power Train Lines and Wiring - Install
14M3 Motor Grader Machine Systems Fuel Tank Mounting
CS54B, CP54B and CS64B Vibratory Soil Compactor Propel System Pump Control (Electrical Proportional Control) Neutral (Axle Propel) - Test and Adjust
14M3 Motor Grader Machine Systems Water Tank
14M3 Motor Grader Machine Systems Water Tank
CS54B, CS64B and CP54B Vibratory Soil Compactor Machine Systems Pressure Sensor (Lift Cylinder Rod End Oil)
797F and 797 XQ Off-Highway Trucks Engine Supplement Modular Front End - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Lift Arms - Remove and Install
14M3 Motor Grader Machine Systems Pump Lines
14L Motor Grader Implement Electronic Control System MID 082 - CID 3284 - FMI 05
14L Motor Grader Implement Electronic Control System MID 082 - CID 3284 - FMI 06
14L Motor Grader Implement Electronic Control System MID 082 - CID 3284 - FMI 13
Protective Hose Sleeves Are Available for -12 Drive Motor Hoses on Certain Multi-Terrain and Compact Track Loaders {3154} Protective Hose Sleeves Are Available for -12 Drive Motor Hoses on Certain Multi-Terrain and Compact Track Loaders {3154}
14L Motor Grader Implement Electronic Control System MID 082 - CID 3285 - FMI 03
14L Motor Grader Implement Electronic Control System MID 082 - CID 3285 - FMI 05
Procedure To Bleed the Conveyor Charge Pump On Certain AP1000F, AP1055F, AP600F, and AP655F Asphalt Pavers {5073, 5652} Procedure To Bleed the Conveyor Charge Pump On Certain AP1000F, AP1055F, AP600F, and AP655F Asphalt Pavers {5073, 5652}
<B>New Lift Cylinders With Improved Serviceability are Now Used On Certain 14M Motor Graders</B> {5102} <B>New Lift Cylinders With Improved Serviceability are Now Used On Certain 14M Motor Graders</B> {5102}
14L Motor Grader Implement Electronic Control System MID 082 - CID 3285 - FMI 06
14L Motor Grader Implement Electronic Control System MID 082 - CID 3285 - FMI 13
CS54B, CP54B and CS64B Vibratory Soil Compactor Propel System Pump Control (Manual Displacement Control) Neutral (Axle Propel) - Test and Adjust
Improved Repair/Replace Processes are now in Place for the CX38 Transmission {0374, 3030} Improved Repair/Replace Processes are now in Place for the CX38 Transmission {0374, 3030}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.