AP300F Asphalt Paver Machine System Caterpillar


Gear Pump (Tamper)

Usage:

AP300F NNN


Illustration 1g06069281
Left Side of Machine
(1) Tamper pump

Tamper pump (1) is installed onto the end of the propel pump stack. The left compartment door provides access to the tamper pump.

Tamper pump (1) is a gear-type pump with a fixed-displacement. This pump provides oil flow to operate the tamper motors.

The pump draws oil from the hydraulic tank. Pump supply oil is sent to the tamper manifold.

Caterpillar Information System:

558 Forest Machine Machine Systems Stick System
AP300F Asphalt Paver Machine System Control Valve (Hopper and Auger)
AP300F Asphalt Paver Machine System Bank Valve (Implement)
AP300F Asphalt Paver Machine System Location of Electrical Components (Auger and Conveyor System)
New Fittings Are Now Used To Connect The Air Tank Group And The Engine Compressor Group On Certain Motor Graders {4272} New Fittings Are Now Used To Connect The Air Tank Group And The Engine Compressor Group On Certain Motor Graders {4272}
Replacement Procedure for "XT6 (-12)" Hose Assemblies on certain Soil Compactors {3154} Replacement Procedure for "XT6 (-12)" Hose Assemblies on certain Soil Compactors {3154}
Cat® Grade Control Cross Slope System for Motor Graders Diagnostic Trouble Codes
533 and 543 Wheel Feller Bunchers Power Train Axle Housing - Assemble
2570D, 2670D Wheel Feller Buncher Stopping the Engine
2570D, 2670D Wheel Feller Buncher Backup Alarm
2570D, 2670D Wheel Feller Buncher Monitoring System - Monitor Display
14M3 Motor Grader Machine Systems Hydraulic Cylinder Drift - Check
CCS7 Compactor Machine Systems Communication Electronic Control Module (Product Link)
CW16 Compactor Machine System Communication Electronic Control Module (Product Link)
CW16 Compactor Machine System Instrument Console
CW16 Compactor Machine System Suspension Seat
14M3 Motor Grader Machine Systems Cylinder Cycle Time - Check
AP500F Asphalt Paver Machine Systems Wheel (Rear) - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2177 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2177 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2177 - FMI 06
777E Off-Highway Truck Sound Information and Vibration Information
CW16 Compactor Power Train Propel System Wheel and Tire
A New Bolt Is Now Used in the Loader Frame Group on Certain 216B3 and 226B3 Skid Steer Loaders {7054, 7054} A New Bolt Is Now Used in the Loader Frame Group on Certain 216B3 and 226B3 Skid Steer Loaders {7054, 7054}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.