AP500F Asphalt Paver Machine Systems Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g06059620

1. Lower stack assembly (1).
   Show/hide table

   Illustration 2	g06059662

2. Open access door (2).
   Show/hide table

   Illustration 3	g06059672

3. Disconnect harness assembly (3). Harness assembly (3) is located behind the fuel fill neck.
   Show/hide table

   Illustration 4	g06059690

4. Remove cable straps (4) and reposition harness assembly (3).
   Show/hide table

   Illustration 5	g06059710

5. Remove cable straps (5).

6. Remove harness assembly (3) from the tube frame.

7. Disconnect connector (6) from the light.
   Show/hide table

   Illustration 6	g06059719

8. Remove cable straps (7) that secure harness assembly (3) to the frame.
   Show/hide table

   Illustration 7	g06059948

9. Disconnect connector (9) from the light.

10. Remove cable straps (8) that secure harness assembly (3) to the frame. Reposition harness assembly (3) out of the way.
    Show/hide table

    Illustration 8	g06059952

11. Attach a suitable lifting device to canopy (10). The weight of canopy (10) is approximately 205 kg (452 lb).
    Show/hide table

    Illustration 9	g06059963

12. Remove the cotter key and pin assembly (11) from both sides of the machine.
    Show/hide table

    Illustration 10	g06059976

13. Remove the cotter key and pin assembly (12) from both sides of the machine.

14. Remove canopy (3).

Installation Procedure

1. Install canopy (3) in the reverse order of removal.