3176C and 3196 Industrial Engines Caterpillar


Fuel Transfer Pump

Usage:

3196 1DW



Illustration 1g00280095



Illustration 2g00280096

(1) Outlet port

(2) Drain hole

(3) Inlet port

(4) Pressure regulating valve

When the fuel transfer pump is using diesel fuel, the fuel transfer pump has the following specifications.

Run the pump at 2538 rpm. The full bypass pressure should be the following value. ... 682 to 751 kPa (99 to 109 psi)

Run the pump at 846 rpm. The flow at 482 kPa (70 psi) must be 3.07 L/min (0.811 US gpm).

Run the pump at 3384 rpm. The flow at 585.8 to 654.6 kPa (85 to 90 psi) must be 7.09 L/min (1.87 US gpm).

Run the pump at 147 rpm with a blocked inlet. Run the pump for 30 seconds. The suction of the pump is required to be 60.84 kPa (18 inches hg).

When the pump is viewed from the drive end the rotation of the pump is counterclockwise.

Caterpillar Information System:

3500B Engines for Caterpillar Built Power Modules Accessory Drive (Lower Left Hand)
3176C and 3196 Marine Engines Engine Design
3208 Marine Engine General Information
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Lower Left Hand)
Installation Procedure For Caterpillar Information Display (ID) Buttons {7451} Installation Procedure For Caterpillar Information Display (ID) Buttons {7451}
3512 Industrial Engine Water/Supplemental Coolant Additive (SCA)
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines ETR Component Descriptions
793B Off-Highway Truck Shipping the Machine
3612 and 3616 Fast Vessel Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines ETS Introduction
3500B Engines for Caterpillar Built Power Modules Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines Jacket Water Heater
3500 Engines for Caterpillar Built Generator Sets Accessory Drive (Lower Left Hand)
3176C and 3196 Marine Engines Engine Design
3176C and 3196 Marine Engines Electronic Unit Injector Mechanism
3500B Engines Gear Group (Front)
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines ETS Component Descriptions
3612 and 3616 Fast Vessel Engines Turbocharger - Inspect
3618 Engine Fuel Tank Water and Sediment - Drain
3612 and 3616 Fast Vessel Engines Engine Power Ratings
3500B Engines for Caterpillar Built Power Modules Atmospheric Pressure Sensor
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Aftercooler Coolant Temperature Sensor
3512B and 3516B Engines Engine Coolant Temperature Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.