Differential - Disassemble - Rear
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-7502 | Repair Stand | 1 |
B | 1P-0074 | Slide Hammer Puller Gp | 1 |
C | 8T-0504 | Puller | 1 |
492-5764 | Bearing Extractor | 1 | |
1P-0510 | Driver Gp | 1 |
Start By:
- Remove the rear axle.
- Attach a suitable lifting device to transmission (1). The weight of transmission (1) is approximately
29 kg (65 lb) . Remove nuts (2). Remove transmission (1).Show/hide tableIllustration 2 g01175883 - Attach a suitable lifting device to final drive and carrier (3). The weight of final drive and carrier (3) is approximately
156 kg (344 lb) . Remove bolts (4). Remove final drive and carrier (3).Show/hide tableIllustration 3 g01175884 - Remove axle shaft (5).
Show/hide table
Illustration 4 g01175885 - Attach a suitable lifting device to axle housing (6). The weight of axle housing (6) is approximately
84 kg (185 lb) . Attach axle housing (6) to Tooling (A). Remove bolts (7). Remove axle housing (6).Show/hide tableIllustration 5 g01175886 - Use Tooling (B) to remove bearing cup (8).
Show/hide table
Illustration 6 g01175887 - Remove shim (9).
Show/hide table
Illustration 7 g01175889 - Remove differential assembly (10).
Show/hide table
Illustration 8 g01175891 - Use Tooling (B) to remove bearing cup (11). Remove shim (12).
Show/hide table
Illustration 9 g01175926 - Use Tooling (C) to remove bearing cone (13) from the ring gear side of the differential.
Show/hide table
Illustration 10 g00928428 - Use Tooling (C) to remove the bearing cone from the differential.
Show/hide table
Illustration 11 g01175927 - Remove bolts (14) from differential case.
Show/hide table
Illustration 12 g01175928 - Mark the position of differential case half (15) for assembly purposes. Remove differential case half (15).
Show/hide table
Illustration 13 g01175930 - Remove thrust washer (16) from differential case half (15).
Show/hide table
Illustration 14 g01175931 Show/hide tableIllustration 15 g01175932 - Remove differential gears (17).
- Remove spider gear assembly (18) from differential case half (19).
Show/hide table
Illustration 16 g01175933 - Remove thrust washer (20) from differential case half (19).
Show/hide table
Illustration 17 g01175934 - Use a suitable press to separate differential case half (19) from ring gear (21).
Show/hide table
Illustration 18 g01175936 - Remove spring pins (22) from differential case half (19).
Show/hide table
Illustration 19 g01175937 - Remove thrust washers (23) and bevel gears (24) from spider (25).
Show/hide table
Illustration 1 | g01175882 |
Caterpillar Information System:
773E Off-Highway Truck Towing With Inoperable Engine
AP300F Asphalt Paver Propel System Relief Valve (Pressure Override) - Test and Adjust - Right Pump
773E Off-Highway Truck Lowering the Body with Engine Stopped
New Fuel Hose Assemblies Are Now Used on Certain 3500 Machine Engines {1252} New Fuel Hose Assemblies Are Now Used on Certain 3500 Machine Engines {1252}
773E Off-Highway Truck Windows
CW16 Pneumatic Compactor Engine Starting with Jump Start Cables
CW16 Pneumatic Compactor Parking Brake Manual Release
Remote Flash Process for Electronic Control Modules {7490, 7602, 7606, 7610, 7620} Remote Flash Process for Electronic Control Modules {7490, 7602, 7606, 7610, 7620}
CW16 Pneumatic Compactor Towing the Machine
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Weigh Range Adjusting
CW16 Pneumatic Compactor Lifting and Tying Down the Machine
CW16 Pneumatic Compactor Operator Platform Swivel
773E Off-Highway Truck Cooling System Coolant (ELC) - Change
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Power Train Differential - Assemble - Front
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Calibration Weight Entering
AP300F Asphalt Paver Propel System Steering Wheel - Calibrate
415F2 Backhoe Loaders Hydraulic and Steering System Radiator and Hydraulic Oil Cooler
CW16 Compactor Machine System Fuel Tank
CW16 Compactor Machine System Fuel Lines
Procedure to Retrofit a Rear Cab Walkway onto Certain 793, 793B, and 793C Off-Highway Trucks {7253, 7254, 7255, 7256} Procedure to Retrofit a Rear Cab Walkway onto Certain 793, 793B, and 793C Off-Highway Trucks {7253, 7254, 7255, 7256}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Troubleshooting
M314F, M316F, M318F, M320F and M322F Wheeled Excavator Power Train Tire and Rim - Remove and Install
AP300F Asphalt Paver Machine System Solenoid Valve (Tamper) - Calibrate
New Hose Assemblies are Now Used in the Brake Control Group on Certain 789D Off-Highway Trucks {4257, 4258, 4263, 4264, 4265, 4269, 4280} New Hose Assemblies are Now Used in the Brake Control Group on Certain 789D Off-Highway Trucks {4257, 4258, 4263, 4264, 4265, 4269, 4280}