994K Wheel Loader Systems Caterpillar


Bucket Control

Usage:

994K MM9


Illustration 1g03890199

Table 1
Specification for 389-4607 Cylinder Mounting Gp 
Item   Qty  Part  Specification Description 
3E-8011 Bolt  Apply Loctite C5A copper anti seize to the threads of the bolt.
Tighten the bolt to 1800 ± 200 N·m (1328 ± 148 lb ft). Tap the joint until the torque drops lower than 950 N·m (701 lb ft). Again, tighten the bolt to 1800 ± 200 N·m (1328 ± 148 lb ft). Apply a second impact until the torque drops to less than 1600 N·m (1180 lb ft). Once again, tighten the bolt to 1800 ± 200 N·m (1328 ± 148 lb ft).
Torque the bolt to 1800 ± 200 N·m (1328 ± 148 lb ft) after 50 hours of vehicle operation. 
245-3251 Collet  Before assembly, outer diameter, inner diameter, and mating surfaces to be clean. Apply Loctite C5A copper anti seize to the outer diameter and inner diameter of the collet. 
9X-7703 Lip Type Seal  Before assembly apply red Loctite 263 . 
245-1558 Pin  Measure the distance on both sides of the installed pin and position pin evenly on both sides. 

Caterpillar Information System:

Cat® Fleet Onboard v3.x Maintenance Interval Schedule
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Assemble
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Disassemble
AP300F Asphalt Paver Machine System Drag Conveyor - Calibrate
994K Wheel Loader Systems Torque Converter
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 System Schematic
994K Wheel Loader Systems Ether Starting Aid
Instructions for Rerouting the Expansion Tank Coolant Lines on Certain 795F AC Off-Highway Trucks {1354, 1380} Instructions for Rerouting the Expansion Tank Coolant Lines on Certain 795F AC Off-Highway Trucks {1354, 1380}
MD6200 Rotary Drill Hydraulic System (Crane) Oil Sample - Obtain - If Equipped
MD6200 Rotary Drill Hydraulic System (Crane) Oil Level - Check - If Equipped
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 VIMSpc Payload Reports
MD6200 Rotary Drill Hydraulic System (Crane) Oil - Change - If Equipped
PL72 Pipelayer Systems Torque Divider
815K Soil Compactor and 816K Landfill Compactor General Information (Power Train System)
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Hydraulic Pedal Control (Travel) - Remove and Install
815K Soil Compactor and 816K Landfill Compactor Transmission Hydraulic System
815K Soil Compactor and 816K Landfill Compactor Transmission Oil Pump
815K Soil Compactor and 816K Landfill Compactor Oil Filter (Power Train)
815K Soil Compactor and 816K Landfill Compactor Transmission Lubrication
815K Soil Compactor and 816K Landfill Compactor Transmission Hydraulic Control
815K Soil Compactor and 816K Landfill Compactor Transmission Hydraulic Control Operation
815K Soil Compactor and 816K Landfill Compactor Modulating Valve (Transmission Clutch)
815K Soil Compactor and 816K Landfill Compactor Transmission Planetary
815K Soil Compactor and 816K Landfill Compactor Output Transfer Gears
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.