Hydraulic System (Crane) Oil Sample - Obtain - If Equipped
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
- Remove oil level dipstick (1).
Show/hide table
Illustration 1 | g03890125 |
Right side view of cab (1) Oil level dipstick (2) Oil drain plug |
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.
- Obtain the oil sample through the hole for the oil level dipstick (1).
- Install oil level dipstick (1).
Note: Dispose of drained fluids according to local regulations.
Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations", "S·O·S Oil Analysis" for more information on obtaining a sample of the final drive oil. For additional information about taking an oil sample, refer to Special Publication, PEGJ0047, "How To Take A Good Oil Sample".
Caterpillar Information System:
MD6200 Rotary Drill Hydraulic System (Crane) Oil Level - Check - If Equipped
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 VIMSpc Payload Reports
MD6200 Rotary Drill Hydraulic System (Crane) Oil - Change - If Equipped
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 VIMSpc Software
994K Wheel Loader Systems Transmission Hydraulic Control
D11 Track-Type Tractor Systems Oil Filter (Power Train)
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Normal Weighing Operation
994K Wheel Loader Systems Service Brake Lines
994K Wheel Loader Systems Liquid Level Sensor (Transmission Oil)
994K Wheel Loader Systems Transmission Oil Pump
994K Wheel Loader Systems Drive Shaft
New Battery Retaining Plate Is Now Used on Certain Articulated Trucks {1401} New Battery Retaining Plate Is Now Used on Certain Articulated Trucks {1401}
Instructions for Rerouting the Expansion Tank Coolant Lines on Certain 795F AC Off-Highway Trucks {1354, 1380} Instructions for Rerouting the Expansion Tank Coolant Lines on Certain 795F AC Off-Highway Trucks {1354, 1380}
994K Wheel Loader Systems Ether Starting Aid
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 System Schematic
994K Wheel Loader Systems Torque Converter
AP300F Asphalt Paver Machine System Drag Conveyor - Calibrate
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Disassemble
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Assemble
Cat® Fleet Onboard v3.x Maintenance Interval Schedule
994K Wheel Loader Systems Bucket Control
PL72 Pipelayer Systems Torque Divider
815K Soil Compactor and 816K Landfill Compactor General Information (Power Train System)
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Hydraulic Pedal Control (Travel) - Remove and Install