PL83 and PL87 Pipelayer Systems Caterpillar

Brake and Planetary

Usage:

PL83 CB2

Show/hide table




Illustration 1	g03869885

Show/hide table

Table 1
Specification for 432-6147 Brake and Planetary Gp
Item	Qty	Part	Specification Description
1	12	0S-1585 Bolt	Torque to 135 ± 20 N·m (100 ± 15 lb ft).
2	Thickness of four new friction discs and three new plates is 40.5 ± 1.2 mm (1.59 ± 0.05 inch):
	5	364-2636 Friction Disc	Thickness of 5.56 ± 0.18 N·m (49.210 ± 1.59 lb in).
	4	7T-6994 Plate	Thickness of one plate is 3.175 ± 0.075 mm (0.1250 ± 0.0030 inch).
3	3	244-2310 Planetary Gear	Inside diameter is 51.948 ± 0.010 mm (2.0452 ± 0.0004 inch).
4	3	7T-8136 Planetary Shaft	Diameter is 42.395 ± 0.006 mm (1.6691 ± 0.0002 inch).
5	6	8E-8307 Thrust Disc	Thickness is 1.91 ± 0.10 mm (0.075 ± 0.004 inch).
6	1	3T-5807 Slinger	Apply Loctite High Flex GM to the flange of the slinger in the area that contact with the carrier.

Caterpillar Information System:

AP655F Asphalt Paver Machine Systems Hydraulic Schematic (Vibratory System)

AP655F Asphalt Paver Machine Systems Electrical Schematic (Vibratory System)

AP655F Asphalt Paver Machine Systems Gear Pump (Vibratory and Charge)

AP655F Asphalt Paver Machine Systems Vibratory Valve

AP655F Asphalt Paver Machine Systems Operator Controls (Vibratory System)

AP655F Asphalt Paver Machine Systems Hydraulic Schematic (Tamper System)

AP655F Asphalt Paver Machine Systems Electrical Schematic (Tamper System)

AP655F Asphalt Paver Machine Systems Piston Pump (Tamper)

PL83 and PL87 Pipelayer Systems Air Lines

R3000H Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install

R3000H Load Haul Dump Power Train Differential and Bevel Gear (Front) - Install

R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove

AP655F Asphalt Paver Machine Systems Location of Components (Washdown System)

AP655F Asphalt Paver Machine Systems Electrical Schematic (Washdown System)

PL83 and PL87 Pipelayer Systems Cab Door

797F Off-Highway Truck Field Assembly Platform (Right Hand) - Install

239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Ride Control Accumulator

PL72 Pipelayers Machine Systems Piston Pump (Charge) - Remove and Install

PL72 Pipelayers Machine Systems Cab - Remove and Install

MSS3s Machine Security System Electrical Connector - Inspect

239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Lift Cylinder

A Procedure to Update the Cooling System on Certain 797F Off-Highway Trucks{1354, 1380} A Procedure to Update the Cooling System on Certain 797F Off-Highway Trucks{1354, 1380}

2015/08/13 A Procedure to Update the Cooling System on Certain 797F Off-Highway Trucks is Now Available {1354, 1380}

PL83 and PL87 Pipelayer Systems Heater Lines