- The Factory Password System (FPS) is a secure web site and a password is required. Proceed to step 1.a if you do not have a "Login ID" and a "Password". Proceed to step 2 if you already have a "Login ID" and a "Password".
- Refer to the "Telephone Help Line" section or see your Caterpillar dealer in order to obtain the factory password.
- Open your web browser. Enter the address for the Factory Password System (FPS) (“http://fps.cat.com”) in the address bar of the web browser.
Upon accessing FPS, the "Corporate Web Security" web site will appear.
Show/hide tableIllustration 1 g03866210 Corporate web Security screen - Enter your "Login ID" and "Password" into the "Corporate Web Security" site. Refer to Illustration 1.
Show/hide table
Illustration 2 g03866226 Product Serial Number - Enter the following information:
- "Product Serial Number"
- "Engine Units"
Note: Enter the hours that are displayed on the service hour meter in the "Engine Units" block. Select "Hours" as the unit.
- "Service Tool Serial Number"
- "ECM Serial Number"
- "Total Tattletale Value"
- "Reason Code"
Note: The "Rerate" section is not used with the Machine Security System. Do NOT enter information in this section.
Note: The information that is listed may be obtained from the "Enter Factory Passwords" screen in the Caterpillar Electronic Technician (ET). Refer to Illustration 3.
Show/hide tableIllustration 3 g03866234 Factory Password Show/hide tableIllustration 4 g03866248 Generated Password - Enter all the required information. Then click the "Generate Password" button. The passwords will then be generated.
Show/hide table
Illustration 5 g03866310 FPS Password Created confirmation screen - Record both of the factory passwords.
Show/hide table
Illustration 6 g03866328 MSS Enter Factory Passwords screen - Refer to Illustration 6. Enter the factory password 1 in the "Factory Password #1" field and enter factory password 2 in the "Factory Password #2" field.
Note: Both passwords are required in order to change any of the parameters of the Machine Security System.
The Telephone Help line for obtaining a Factory Password is the same number assigned to the Dealer Solutions Network (DSN) and is listed below:
(309) 636-8500You will need the information listed below, in order to obtain a Factory Password:
- "Product Serial Number"
- Service Meter Hours ("Engine Unit Block")
- Serial number of the Service Tool (Electronic Technician)
- Serial Number of the MSS3s ECM
- Total Tattletale Value
- Reason Code
Note: The information that is listed may be obtained from the "Enter Factory Passwords" screen in the Caterpillar Electronic Technician (ET). Refer to Illustration 6.
Illustration 7 | g03866252 |