Load Control Valve Lines
Show/hide table
| |
| Illustration 1 | g03862401 |
|
Typical example | |
Show/hide table
| Specification for 431-4762 Check Valve Line and 467-8497 Load Control Valve Lines Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification description |
| 1 | 2 | 116-7286 Single Clamp | Tighten the bolts to |
| 2 | - | - | Torque to |
| 3 | 2 | 344-7389 Pressure Sensor Gp | Before assembly, apply blue Loctite 243 to threads.
Torque to Loosen the pressure sensor group and again torque to Operating voltage is 7 to 14 VDC. Output type is PWM. Output frequency is 500 ± 100 Hz. Duty cycle is 10 to 90 %. |
| 4 | 1 | 135-4990 Single Clamp | Torque to |
| 5 | 1 | - | Torque to |
| 6 | 1 | - | Torque to |
Caterpillar Information System:
MD6200 Rotary Drill Operating Technique Information
MD6200 Rotary Drill System Pressure Release
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
CCS7 Combination Vibratory Compactors Machine Systems Vibratory Support - Assemble
CCS7 Combination Vibratory Compactors Machine Systems Vibratory Support - Disassemble
482-7519 Feeler Gage Tool Group{0374, 0599, 0700, 0701, 0703, 0705, 0759, 1100, 1102, 1105, 1121, 1123} 482-7519 Feeler Gage Tool Group{0374, 0599, 0700, 0701, 0703, 0705, 0759, 1100, 1102, 1105, 1121, 1123}
525D, 535D, 545D and 555D Wheel Skidders General Information
MSS3s Machine Security System Cat Data Link - Test
Procedure to Replace Noncurrent Gear Pumps on Certain Articulated Trucks {5073} Procedure to Replace Noncurrent Gear Pumps on Certain Articulated Trucks {5073}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Front Axle - Remove and Install
MSS3s Machine Security System Electrical Power Supply - Test
MSS3s Machine Security System Determining Diagnostic Trouble Codes
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Transmission
Procedure to Install LED Lights Now Available for R1600G and R1600H Load Haul Dump Machines {1429} Procedure to Install LED Lights Now Available for R1600G and R1600H Load Haul Dump Machines {1429}
Procedure to Install LED Lights on R1600G and R1600H Load Haul Dump Machines {1429} Procedure to Install LED Lights on R1600G and R1600H Load Haul Dump Machines {1429}
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Pilot Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Valve and Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Valve and Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Pilot Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Pilot Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick - 4.8 m (15.75 ft)
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Valve and Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Solenoid Valve
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Solenoid Valve