Gear Pump (Transmission)
Show/hide table
 | |
| 图 1 | g03785078 |
Show/hide table
| 436-6457 齿轮泵总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 9X-7433 唇形密封 | 用少量密封的润滑剂进行润滑。 |
| B | 1 | 375-7176 机油泵轴 | 轴的直径为 22.177 ± 0.005 mm (0.8731 ± 0.0002 in)。 |
| E | 1 | 375-7178 机油泵轴 | 轴的直径为 22.177 ± 0.005 mm (0.8731 ± 0.0002 in)。 |
Show/hide table
 | |
| 图 2 | g03785079 |
C 区视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 2 | 2 | 361-3994 衬套 | 装配后的孔径为 22.248 ± 0.041 mm (0.8759 ± 0.0016 in)。 |
| 衬套接头的位置 (G) 距离衬套孔中心线 45 ± 10 度。 | |||
| 安装深度 (H) 为 1.50 ± 0.25 mm (0.059 ± 0.010 in)。 |
|||
| 3 | 1 | 458-0446 过滤塞 | 拧紧至扭矩为 9 ± 2 N·m (80 ± 18 lb in)。 |
Show/hide table
 | |
| 图 3 | g03785096 |
D 区视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 4 | 2 | 361-3994 衬套 | 装配后的孔径为 22.248 ± 0.041 mm (0.8759 ± 0.0016 in)。 |
| 衬套接头的位置 (L) 距离衬套孔中心线 30 ± 15 度。 | |||
| 安装深度 (M) 为 1.50 ± 0.25 mm (0.059 ± 0.010 in) |
|||
| N | 2 | 8M-8489 定位销 | 突出量为 5.0 ± 0.5 mm (0.20 ± 0.02 in)。 |
Caterpillar Information System:
2015/05/11 New Front Axle Skid Plates are Now Available for Certain 16H and 16M Motor Graders {0679, 3268, 4313, 7150, 7185}
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Muffler - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train System Pressure - Release
2015/02/26 Installation of the Air Lines Group Is Improved on the 797F and 797F XQ Off-Highway Trucks {1071}
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Travel Speed - Adjust
AP255E Asphalt Paver Operator Controls
816K Landfill Compactor Safety Messages
415F2 Industrial Loader Lifting and Tying Down the Machine
SE60 V Asphalt Screed Machine System Solenoid Valve (Extender Extend) - Calibrate
2015/05/18 An Improved Clean Air Intake Louver is Now Used on Certain Backhoe Loaders {7320}
740C EJECTOR Articulated Truck Shipping the Machine
AP255E Asphalt Paver Daily Inspection
735C, 745C and 740C EJECTOR Articulated Truck Systems Fender
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Mud Guard
735C, 745C and 740C EJECTOR Articulated Truck Systems Cab Tilt Cylinder and Mounting Group
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Differential
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Hoist Control Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Gear Pump (Brake/Axle Oil Cooler)
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Air Cleaner
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve (Hydraulic Fan Speed Control)
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C4.4 and C6.6 Engines Cooling Fan Speed - Test