Travel Speed - Adjust
Show/hide table
"Travel Speed - Adjust" | ||
---|---|---|
Date: | Machine Serial Number: | |
Item | Specification | Actual |
Travel Speed | |
Perform the following adjustment to limit the travel speed of the machine while the machine is in second gear with creeper mode disabled.
Show/hide table
Required Tools | ||||
---|---|---|---|---|
Tool | Item | Qty | Part Number | Description |
E | E1 | Cat® Electronic Technician (ET) | ||
E2 | 1 | 317-7484 | Communication Adapter Gp | |
E3 | 1 | 457-6114 | Cable As |
- Connect tooling (E) to the service connector.
Show/hide table
Illustration 1 | g03784813 |
Service connector on the right side of cab behind the seat |
- Start Electronic Technician.
- Select the "Machine ECM" from the list of available controls.
- Go to the "Configuration" menu.
- Select the desired "Machine Speed Limit".
- Enter the value that corresponds with the limit that is to be set. Refer to Table 1 for the proper values.
Show/hide table
Personal injury or death can result from sudden machine movement. Sudden movement of the machine can cause injury to persons on or near the machine. To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine. |
Caterpillar Information System:
AP255E Asphalt Paver Operator Controls
816K Landfill Compactor Safety Messages
415F2 Industrial Loader Lifting and Tying Down the Machine
SE60 V Asphalt Screed Machine System Solenoid Valve (Extender Extend) - Calibrate
2015/05/18 An Improved Clean Air Intake Louver is Now Used on Certain Backhoe Loaders {7320}
740C EJECTOR Articulated Truck Shipping the Machine
AP255E Asphalt Paver Daily Inspection
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Install
2015/02/10 A New Fast Fill Fuel System Manual is Now Available {1710}
AP255E Asphalt Paver Declaration of Conformity
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Suspension Cylinder (Front)
AP255E Asphalt Paver Plate Locations and Film Locations
2015/02/26 Installation of the Air Lines Group Is Improved on the 797F and 797F XQ Off-Highway Trucks {1071}
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train System Pressure - Release
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Muffler - Remove and Install
2015/05/11 New Front Axle Skid Plates are Now Available for Certain 16H and 16M Motor Graders {0679, 3268, 4313, 7150, 7185}
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
735C, 745C and 740C EJECTOR Articulated Truck Systems Fender
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Mud Guard
735C, 745C and 740C EJECTOR Articulated Truck Systems Cab Tilt Cylinder and Mounting Group
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Differential
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Hoist Control Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Gear Pump (Brake/Axle Oil Cooler)