A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785} Caterpillar


A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Usage:

MT700 018
Caterpillar Products
All
Service Magazine, SEPD1883, 10, November 2014, "A New Cable As Is Now Available For Excavators, Wheeled Excavators And Track Type Tractors". Disregard this article. See the article that follows.

Description Of Change: A new Cable As is now available. The new harness will allow connections between either the common 9-Pin Service Port Connector or the new 14-Pin Service Port Connector with ethernet and the Communication Adaptor 3 (CA3) module.

The effective machines are being produced with a new 14-pin Service Port Connector that includes Ethernet circuit connections. The new 14-Pin Service Port Connector takes the place of the common 9-pin Service Port Connector. The new 14-Pin Service Port Connector includes an Ethernet port connector which allows for flashing software using Ethernet. These machines require the use of the 14-Pin Service Connector Cable for the CA3 Communication adapter.

Adaptable To: The 457-6114 Cable As can be used in place of the existing 327-8981 Cable As.



Illustration 1g03730620
(1) 457-6114 Cable As

Caterpillar Information System:

950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Limiter (Auxiliary Valve) - Check and Adjust
745 Articulated Truck Engine Oil Level - Check
794 AC Off-Highway Truck Engine Supplement Belt Tightener - Remove and Install
785G Off-Highway Truck Systems Pressure Sensor (Brake Oil Accumulator)
794 AC Off-Highway Truck Engine Supplement Damper - Remove and Install
785G Off-Highway Truck Systems Pressure Sensor (Parking Brake Oil)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Disassemble
794 AC Off-Highway Truck Engine Supplement Electric Starting Motor - Remove and Install
794 AC Off-Highway Truck Engine Supplement Refrigerant Compressor - Remove and Install
QUICK COUPLERS Coupler Hydraulic System
745 Articulated Truck Crankshaft Vibration Damper - Inspect
C175 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
C7 and C9 Industrial Engines Coolant Level - Test
2015/07/07 New Software Is Now Used On Certain M Series Motor Graders {1920, 7620}
C7 and C9 Industrial Engines Electrical Power Supply - Test
QUICK COUPLERS Quick Coupler
C4.4 Engines for Caterpillar Built Machines Engine Design
Rework Procedure to Replace the Lever in the Propel Lever Group on Certain PS-150C and PS-360C Paving Compactors{3065} Rework Procedure to Replace the Lever in the Propel Lever Group on Certain PS-150C and PS-360C Paving Compactors{3065}
Installation of Heater Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1074, 1317, 664E} Installation of Heater Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1074, 1317, 664E}
PL83 and PL87 Pipelayers Hook Load Line - Install
785G Off-Highway Truck Systems Brake Valve (Parking)
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.