AP255E Asphalt Paver Machine Systems Caterpillar


Conveyor Chain (Drag) - Adjust

Usage:

AP-255E D8A

------ WARNING! ------

柴油发动机的排气含有可伤害人体的燃烧产物。

必须要在通风良好的地方起动发动机,如果在密闭的地方起动,就要把排气通到外面。


------ WARNING! ------

旋转和运动的部件会造成人身伤害。 应避开所有旋转和运动的部件。

机器移动或发动机运转时决不能试图进行部件的调整工作,除非另有规定。

机器必须停在水平地面上,且发动机停止运转。

维修、修理或调整机器前,在起动开关和控制装置上要贴上"禁止操作"或类似的警告标签。


  1. 把机器开到平整水平的路面。


    图 1g03728226

  2. 将行驶方向开关 (1) 移到空档位置。

  3. 将行驶速度旋钮 (2) 逆时针转至最小位置。


    图 2g03728228

  4. 将停车制动器操纵杆 (3) 移到接通位置。


    图 3g03728230

  5. 将油门操纵杆 (4) 移到低怠速位置。


    图 4g03728235

  6. 将锁 (5) 移到一旁,然后将熨平板提升杆 (6) 移到浮动位置。 将熨平板降至地面。


    图 5g03728233

  7. 将发动机起动开关 (7) 移到 OFF(断开)位置。


    图 6g03728231
    (a) 20 ± 2 mm (0.79 ± 0.08 inch)

  8. 在上图所示的两个位置处测量刮板链条的下垂度。 刮板链条顶部和机架底部法兰间的平均距离应为 20 ± 2 mm (0.79 ± 0.08 inch)

  9. 如果要调节刮板输送机,采用以下步骤:


      图 7g03728236

    1. 顺时针转动调整螺母 (8) 以减小下垂度。 必须均匀转动调整螺母。

    2. 逆时针转动调整螺母 (8) 以增大下垂度。 必须均匀转动调整螺母。

Caterpillar Information System:

AP255E Asphalt Paver Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
785G Off-Highway Truck Capacities (Refill)
785G Off-Highway Truck Systems Transmission Hydraulic Control
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Sound Information and Vibration Information
C4.4 Engines NOx Sensor - Test
773E Off-Highway Truck Power Train Transmission Control
C4.4 Engines Motorized Valve - Test
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Backup Controls
C3.4B Engines Motorized Valve - Test
C4.4 Engines Mode Selection - Test
C4.4 Engines Injector Solenoid - Test
C4.4 Engines Injector Data Incorrect - Test
2014/09/22 Improved Retention of Fasteners {5622}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Piston Pump (Fan Drive)
785G Off-Highway Truck Systems Temperature Sensor (Steering Oil)
AP255E Asphalt Paver Machine Systems Heater Element - Test
M318F, M320F and M322F Wheeled Excavators Hydraulic System Pump Control - Fan
785G Off-Highway Truck Systems Pressure Switch - Manifold Bypass
Procedure to Inspect and Rework the Frame 4 Bar Casting to Main Rail Connection Offset on the 793F Off-Highway Truck {0679, 7051} Procedure to Inspect and Rework the Frame 4 Bar Casting to Main Rail Connection Offset on the 793F Off-Highway Truck {0679, 7051}
2014/09/26 The Brake Control Group has been Improved on the 795F AC Off-Highway Truck {4257, 4265, 4269}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Steering Control Valve - Assemble
785G Off-Highway Truck Systems Steering Accumulator
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Steering Control Valve - Disassemble
PL83 and PL87 Pipelayers Fuel System Secondary Filters - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.