Engine Oil Pump
Show/hide table
Illustration 1 | g03655107 |
Show/hide table
NOTICE |
---|
Before operating the engine, the oil pump must be lubricated with clean engine oil. The oil pump must turn freely by hand. Damage to the drive gear and internal pump damage can occur if the oil pump is not lubricated with clean engine oil. |
Show/hide table
Specification for 444-8207 Engine Oil Pump Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | Pump performance: |
- | - | - | Oil type is SAE 30. |
- | - | - | Oil temperature is |
- | - | - | Pump speed is 3000 rpm. |
- | - | - | Oil pressure is |
1 | 3 | 6V-5134 O-Ring Seal | Lubricate lightly with the lubricant that is being sealed. |
2 | 2 | 224-3402 Gear | Length is |
Depth of the bore in oil pump body for the gear is |
|||
- | - | In order to install the oil pump gears on the shafts, the oil pump gears must first be heated. Do not heat the oil pump gears above the temperature of |
|
3 | 1 | 224-3404 Shaft | Diameter is |
Diameter of the bore in oil pump body for the shaft is |
|||
4 | 1 | 6V-3834 O-Ring Seal | Lubricate lightly with the lubricant that is being sealed. |
5 | 2 | 5P-8068 O-Ring Seal | Lubricate lightly with the lubricant that is being sealed. |
6 | 1 | 224-3403 Shaft | Diameter is |
Diameter of the bore in oil pump body for the shaft is |
|||
7 | 1 | Oil pump drive gear | In order to install the oil pump drive gear on the shaft, the oil pump drive gear must first be heated. Do not heat the oil pump drive gear above the temperature of |
Caterpillar Information System:
C9.3 Tier 4 Final Engines Cylinder Head Valves
C13 Tier 4 Final Engines Fan Drive
2014/03/31 Improved Transmission Control Gp Is Now Used on Certain Cat® Backhoe Loaders {1408, 3168}
914G2 and IT14G2 Compact Wheel Loaders Hydrostatic Drive Oil Level - Check
725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
C7 Engine for Caterpillar Built Machine Inlet Air Temperature Sensor - Remove and Install
2014/03/31 Special Instruction, REHS7992, "Procedure to Install the Working at Heights Retrofit Kit on the 789D Off-Highway Truck" has been Updated {0635, 0679, 6922, 7051, 7255, 7256, 7509}
797 Off-Highway Truck Powered Stairway - Check
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Hydraulic System
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Combination Valve - (Brake Charging) (Implement, Steering Pilot) (Clean Emissions Module Fan)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Brake Charging) (Implement, Steering Pilot) (Clean Emissions Module Fan)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Electronic Control (Hydraulic System)
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
C9.3 Tier 4 Final Engines Electric Starting Motor
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
C9.3 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
2014/04/08 A New Pneumatic Tool Kit Is Now Available for Certain PM-200 Cold Planers {0745, 0751}
2014/04/29 A New Special Instruction, REHS9176 , "Procedure to Assemble Canopy Cover on Certain PM-102 Cold Planers" Is Now Available {7165, 7302}
2014/03/28 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
725C, 725C2, 730C and 730C2 Articulated Truck Systems Pressure Tap Locations
826K Landfill Compactor Capacities (Refill)
2014/03/31 The Assembly Procedure for the 797F and the 797F XQ Off-Highway Trucks Has Been Updated for the Installation of the Rocker Assemblies {7000, 7006, 7960}