Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Reference: For more information, refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".
Illustration 1 | g02746276 |
The hydrostatic motor drive gear box is located on the underside of the machine. |
Models PDF1-1768, ; FWL1-950, and ; KZN1-Up, ; KNP1-213 and ; ERP1-213
- Allow the machine to cool before you check the hydrostatic motor drive gear case oil level. Oil could spray when you remove the plug.
Show/hide table
Illustration 2 g00402618 - Remove the oil level/fill plug slowly in order to release pressure. The oil should be level with the bottom of the plug threads.
- Add oil, if necessary.
- Clean the oil level/fill plug and install the oil level/fill plug.
Models PDF1769-Up and ; FWL951-Up, ; KNP214-Up and ; ERP214-Up
- Allow the machine to cool before you check the hydrostatic motor drive gear case oil level. Oil could spray when you remove the plug.
Show/hide table
Illustration 3 g03654997 - Remove the oil level/fill plug slowly in order to release pressure. The oil should be level with the bottom of the plug threads.
- Add oil, if necessary.
- Clean the oil level/fill plug and install the oil level/fill plug.