A New Pneumatic Tool Kit Is Now Available for Certain PM-200 Cold Planers {0745, 0751}
- Cold Planers:
- PM-200 (S/N: P1C1-UP; P1M1-UP)
Description of Change: A new pneumatic tool kit (hammer and shank) is now available for machines listed above.
Adaptable To:
Show/hide table
| Parts List | ||||
| Item | Qty | New Part Number | Description | Former Part Number |
| 1 | 1 | 107623 | Hammer | 107548 |
| 2 | 1 | 107622 | Tool | 0980070002 |
Show/hide table
 | |
| Illustration 1 | g03659863 |
(A) Shank size | |
The new kit is composed by:
- Hammer bitelli (part number 107623) with a 10.2 mm hex shank.
- Tool bitelli (part number 107622) with a 10.2 mm hex shank.
The new kit will replace the former:
- Hammer bitelli (part number 107548) with a 12.7 mm hex shank.
- Tool bitelli (part number 0980070002) with a 12.7 mm hex shank.
The former 12.7 mm hex shank hammer is phased out, the former 12.7 mm hex shank tool is still available as service part.
Replace the former 107548 hammer with the new 107623 hammer (1) .
Replace the former 0980070002 tool with the new 107622 tool (2) .
New 107623 Hammer and 107622 Tool are adaptable to machines P1C1-UP, P1M1-UP.
Caterpillar Information System:
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C9.3 Tier 4 Final Engines Turbocharger
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
C9.3 Tier 4 Final Engines Electric Starting Motor
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
C13 Tier 4 Final Engines Engine Oil Pump
C9.3 Tier 4 Final Engines Cylinder Head Valves
C13 Tier 4 Final Engines Fan Drive
2014/03/31 Improved Transmission Control Gp Is Now Used on Certain Cat® Backhoe Loaders {1408, 3168}
914G2 and IT14G2 Compact Wheel Loaders Hydrostatic Drive Oil Level - Check
725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
C7 Engine for Caterpillar Built Machine Inlet Air Temperature Sensor - Remove and Install
2014/04/29 A New Special Instruction, REHS9176 , "Procedure to Assemble Canopy Cover on Certain PM-102 Cold Planers" Is Now Available {7165, 7302}
2014/03/28 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
725C, 725C2, 730C and 730C2 Articulated Truck Systems Pressure Tap Locations
826K Landfill Compactor Capacities (Refill)
2014/03/31 The Assembly Procedure for the 797F and the 797F XQ Off-Highway Trucks Has Been Updated for the Installation of the Rocker Assemblies {7000, 7006, 7960}
770G and 772G Off-Highway Truck Brake Discs - Check
Cat® Detect 8 Radar Object Detection System Software Version 3 Maintenance Interval Schedule
735C, 740C EJECTOR and 745C Articulated Trucks Diagnostic Trouble Codes
CAT MT4400D AC Off-Highway Truck Engine Supplement Fan - Remove and Install
825K Soil Compactor Capacities (Refill)
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Self Test