824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Caterpillar

Push Arm

Usage:

824K 234

Show/hide table




Illustration 1	g03648132

Show/hide table

Table 1
Specification for 418-4614 Bulldozer Arm Gp
Item	Qty	Part	Specification Description
1	4	7X-2561 Bolt	Torque to 520 ± 70 N·m (384 ± 52 lb ft).
2	2	1U-0873 Pin	Diameter is 50.22 ± 0.02 mm (1.977 ± 0.001 inch).
3	52	9W-7602 Shim	As required, use the shims to obtain a clearance of 0.2 to 1.0 mm (0.01 to ± 0.04 inch) with the tractor and dozer trunnion balls: Thickness is 0.8 mm (0.03 inch).
4	2	346-1656 Pin As	Diameter is 88.875 ± 0.025 mm (3.4990 ± 0.0010 inch).
5	As required, install the spacers to obtain a maximum total clearance of 2.0 mm (0.08 inch) between the blade and the non-engine end frame. Position the spacers evenly in order to center the blade to the non-engine end frame.
	14	151-2414 Spacer	Thickness of one new spacer is 1.5 mm (0.06 inch).
	4	151-2413 Spacer	Thickness of one new spacer is 5.0 mm (0.20 inch).
6	2	8T-4780 Bolt	Torque to 520 ± 70 N·m (384 ± 52 lb ft).

Show/hide table




Illustration 2	g03648187
418-4616 Bulldozer Stabilizer

Show/hide table

Table 2
Item	Qty	Part	Specification Description
7	4	131-3445 Spacer	As required, install the spacers to obtain a maximum total clearance of 2.0 mm (0.08 inch) between the blade and the non-engine end frame. Position the spacers evenly in order to center the blade to the non-engine end frame. Thickness of one new spacer is 1.5 mm (0.06 inch).
8	2	9J-1555 Bushing	Bore before assembly is 102.24 ± 0.05 mm (4.025 ± 0.002 inch).
9	8	8T-4956 Bolt	Torque to 105 ± 20 N·m (77 ± 15 lb ft).
10	1	8T-4648 Bolt	Torque to 105 ± 20 N·m (77 ± 15 lb ft).

Caterpillar Information System:

950M, 962M, 950M Z and 962M Z Wheel Loaders Lift Cylinder - Remove and Install

CAT MT4400D AC Off-Highway Truck/Tractor Power Train Inverter Cabinet - Remove and Instal

16M Series 3 and 18M Series 3 Motor Graders Monitoring System

826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module

980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Hydraulic Fan) - Air compressor for VPF

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Guard Cylinder (Bottom Guard Lift System)

D8T TRACK-TYPE TRACTORS Machine Systems Suspension Seat - Air

980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Conditioner Lines

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Accumulator

16M Motor Grader Moldboard Wear Strip - Inspect/Adjust/Replace

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Radiator Guard

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Torque Converter - Housing

2014/03/19 An Improved Undercarriage Drive Motor Assembly Is Now Used on Certain Compact Track Loaders {4351, 5058}

CAT MT4400D AC Off-Highway Truck Machine Systems Electric Retarder - Remove and Install

16M Series 3 and 18M Series 3 Motor Graders Operator Controls

2014/05/19 An Improved Relief Valve for the Rear Axle Lubrication Lines Group Is Now Available on 797 and 797B Off-Highway Trucks {3016, 3291, 4095}

826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Nozzle Heater Harness - Remove and Install - Clean Emissions Module

C7 Engine for Caterpillar Built Machine Engine Oil Pump - Remove and Install

2014/05/08 An Improved Lubrication Pump Group Is Now Used on Certain 777F and 777G Off-Highway Trucks {7516, 7540}

950M, 962M, 950M Z and 962M Z Wheel Loaders System Pressure - Release

12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Sensor Signal (PWM) - Test

M325D MH Material Handler Maintenance Interval Schedule

Procedure to Improve the Hoist Lines Group on the 777G Off-Highway Trucks{5056, 5056, 5057, 5057} Procedure to Improve the Hoist Lines Group on the 777G Off-Highway Trucks{5056, 5056, 5057, 5057}

2014/05/21 The Hoist Lines Group has been Improved on 777G Off-Highway Trucks {5056, 5056, 5057, 5057}