Components of the Hydraulic System
- Hydraulic Tank
- Hydraulic Oil Cooler
- Electrohydraulic Implement Controls
- Implement Joystick Control (Optional)
- Implement Pump
- Lift Cylinders
- Lift Linkage Position Sensor
- Tilt Cylinder
- Tilt Linkage Position Sensor
- Implement ECM
- Electrohydraulic Control Valve (Implement)
- Auxiliary Control Valve (Implement)
- Hydraulic Fan Motor
- Piston Pump (Brake Charging and Implement/Steering Pilot)
- Manifold Valve (Brake Charging and Implement/Steering Pilot)
- Ride Control Accumulators
| |
| Illustration 1 | g03674483 |
The hydraulic tank is located behind the operator station of the machine.
| |
| Illustration 2 | g03674485 |
The hydraulic oil cooler is located in the rear of the machine inside the back grill.
Electro-Hydraulic Implement Controls
| |
| Illustration 3 | g03650637 |
|
Implement Control Levers (1) Tilt control lever. (2) Lift control lever. (3) Auxiliary control lever (If equipped). | |
The implement control levers are located to the right of the operator seat.
Implement Control Joystick (optional)
| |
| Illustration 4 | g03650600 |
|
Implement Control Joystick (optional) | |
The optional implement control joystick is located to the right of the operator seat.
| |
| Illustration 5 | g03650970 |
The implement pump is located on the right-hand side of the machine beneath the platform door group behind the cab.
| |
| Illustration 6 | g03651060 |
The lift cylinders are located on each side of the machine inside the non-engine end frame.
| |
| Illustration 7 | g03651097 |
Lift linkage position sensor is located on the right-hand side of the machine linkage.
| |
| Illustration 8 | g03651076 |
The tilt cylinder is located on the front linkage.
| |
| Illustration 9 | g03674518 |
Tilt linkage position sensor is located at the front of the machine on the side of the tilt linkage.
| |
| Illustration 10 | g03651183 |
The implement ECM is located behind the operators seat of the machine.
Electro- Hydraulic Control Valve (Implement)
| |
| Illustration 11 | g03651154 |
|
Parts removed for clarity. | |
The implement valve is located in the front linkage.
Auxiliary Control Valve (Implement)
| |
| Illustration 12 | g03668241 |
The auxiliary valve is located in the front loader frame.
| |
| Illustration 13 | g03668244 |
The hydraulic fan motor is located in the rear of the machine near the fan hub.
Piston Pump (Brake Charging and Implement/Steering Pilot)
| |
| Illustration 14 | g03668245 |
The fan/brake pump is located on the right rear of the machine next to the engine.
Manifold Valve (Brake Charging and Implement/Steering Pilot)
| |
| Illustration 15 | g03668247 |
The fan/brake valve is located on the right side of the machine in the hydraulic service center.
| |
| Illustration 16 | g03668248 |
The ride control accumulators are located on the right inside of the lift arms near the articulated hitch.