- Off-Highway Truck/Tractor:
- 789D (S/N: SPD1-UP; SHH1-UP)
Illustration 1 | g03591396 |
Typical view of the bearing cap (1) Plate (2) Cap (3) Bearing (4) Retaining ring |
NOTICE |
---|
In order to install the bearing cap correctly the retaining ring must face towards the suspension cylinder when installed. An incorrectly installed bearing cap may result in cap bearing failure and/or front suspension cylinder failure. |
The installation of the front suspension group in Special Instruction, REHS5076, "Assembly Procedure for the 789DOff-Highway Truck" has been updated. Refer to Illustration 1 for the correct orientation of the bearing cap for installation.
For a complete list of material and the correct procedure that is needed in order to install the front suspension group, refer to Special Instruction, REHS5076, "Assembly Procedure for the 789DOff-Highway Truck". The special instruction can be found on the Caterpillar service information system (SIS) and through the normal literature distribution system at your local Cat dealer.
Note: The service manuals listed in Table 1 have also been updated.
Updated Service Manuals     | |
Sales Model     | Media Number     |
784C and 785C     | Disassembly and Assembly Manual, SENR1500     |
785D OEM     | Disassembly and Assembly Manual, KENR8192     |
789D and 789D XQ     | Disassembly and Assembly Manual, UENR1074     |
793D     | Disassembly and Assembly Manual, RENR8332     |
793F     | Disassembly and Assembly Manual, KENR8579     |