Engine Oil Bypass Valve
Show/hide table
Illustration 1 | g00919893 |
Typical engine oil pump |
Show/hide table
Illustration 2 | g00921377 |
Relief valve and spring |
(1) Tighten the plug for the relief valve to the following torque. ...
(2) Plunger
- Diameter of the plunger ...
19.139 to 19.225 mm (0.75350 to 0.75689 inch)
- Clearance of plunger in bore ...
0.06 to 0.09 mm (0.00236 to 0.00354 inch)
(3) Spring
- Length of the spring ...
80.94 mm (3.1866 inch)
Show/hide table
Illustration 3 | g00919890 |
Plug |
Show/hide table
Illustration 4 | g00921379 |
The relief valve for the balancer |
(1) Tighten the plug for the relief valve to the following torque. ...
(2) Plunger
- Diameter of the plunger ...
14.46 to 14.48 mm (0.5692 to 0.5700 inch)
- Clearance of the plunger in the bore ...
0.04 to 0.08 mm (0.0015 to 0.0031 inch)
(3) Spring
- Length of the spring ...
67 mm (2.6378 inch)
Caterpillar Information System:
Product Link 121S/300 MID 122 - CID 1251 - FMI 03
Product Link 121S/300 MID 122 - CID 1250 - FMI 09
Product Link 121S/300 MID 122 - CID 0269 - FMI 04
Product Link 121S/300 MID 122 - CID 0269 - FMI 03
Product Link 121S/300 MID 122 - CID 0254 - FMI 12
Product Link 121S/300 MID 122 - CID 0254 - FMI 04
Installation of Heated End Gates{6640} Installation of Heated End Gates{6640}
Product Link 121S/300 MID 122 - CID 0168 - FMI 01
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Push Arms and Blade - Remove and Install
424B Backhoe Loader Axles, Differential and Brakes Axle (Front)
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Oil Filter (Hydraulic Return)
14M3 Motor Grader Machine Systems Air Conditioner and Mounting
Product Link 121S/300 Electronic Control Module (ECM) - Flash Program
C4.4 Engines for Caterpillar Built Machines Engine Oil Pump
Product Link 121S/300 Electronic Control Module (ECM) - Replace
Product Link 121S/300 Electrical Connector - Inspect
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Diesel Exhaust Fluid Tank
Product Link 121S/300 Wiring Harness (Open Circuit) - Test
Product Link 121S/300 Wiring Harness (Short Circuit) - Test
Product Link 121S/300 Specifications
Product Link 121S/300 System Schematic
Product Link 121S/300 ECM Does Not Communicate with User Interface
994K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
C4.4 Engines for Caterpillar Built Machines Piston and Rings