Axle (Front)
Show/hide table
Illustration 1 | g03590262 |
(1) Hub assembly (2) Spindle assembly (3) Kingpin (4) Tie bar (5) Axle (6) Hydraulic steering cylinder |
The hub assemblies (1) rotate on the spindle assemblies (2) with two opposing tapered roller bearings. Tightening a nut to a specified torque adjusts the end play. Two sleeve bearings are pressed into each spindle assembly (2) and assembled onto the fabricated axle (5) with kingpins (3) .
The hydraulic steering cylinder (6) is mounted to the axle. The steering cylinder is connected to the arms of the spindle (RH).
Caterpillar Information System:
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Oil Filter (Hydraulic Return)
14M3 Motor Grader Machine Systems Air Conditioner and Mounting
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Instrument Panel
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Sideshift Slide Lock Circuit
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader) - Mechanically Operated
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Bank Valve (Backhoe) - Mechanically Operated
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Pump Lines - Rear
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Tank
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Air Conditioner Lines
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Cab
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Tank
424B Backhoe Loader Hydraulic and Steering System Relief Valve (Loader) - Test and Adjust
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Push Arms and Blade - Remove and Install
Product Link 121S/300 MID 122 - CID 0168 - FMI 01
Installation of Heated End Gates{6640} Installation of Heated End Gates{6640}
Product Link 121S/300 MID 122 - CID 0254 - FMI 04
Product Link 121S/300 MID 122 - CID 0254 - FMI 12
Product Link 121S/300 MID 122 - CID 0269 - FMI 03
Product Link 121S/300 MID 122 - CID 0269 - FMI 04
Product Link 121S/300 MID 122 - CID 1250 - FMI 09
Product Link 121S/300 MID 122 - CID 1251 - FMI 03
C4.4 Engines for Caterpillar Built Machines Engine Oil Bypass Valve
Product Link 121S/300 Electronic Control Module (ECM) - Flash Program
C4.4 Engines for Caterpillar Built Machines Engine Oil Pump