725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Caterpillar


Truck Body Mounting

Usage:

725C2 2L6


Illustration 1g06037252

Table 1
Specification for 380-2078 Truck Body Mounting Gp 
Item  Qty  Part  Specification Description 
416-4362 Pin As  Diameter is 74.95 to 75.00 mm (2.951 to 2.953 inch)
5U-0297 Shim  As required, Use the shims to adjust minimum clearance between pivot lugs and rear chassis.
Assemble the shims in order to fit to inside faces of outer plate as shown in the Illustration 1.
Thickness is 1.6 mm (0.06 inch)
142-1227 Pin As  Diameter is 76.025 to 0.025 mm (2.9931 to 0.0010 inch)

Caterpillar Information System:

725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission Hydraulic Control Valve
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Control
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Truck Body Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission and Hoist Control
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Tailgate Cylinder
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hydraulic Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Mud Guard
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
16M Series 3 and 18M Series 3 Motor Grader Power Train System
Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260} Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260}
2013/11/27 A New Bracket for the Lockout Hasp Is Available for F Series Backhoe Loaders {1411, 7505}
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Operator Controls (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Location of Electrical Components (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Location of Hydraulic Components (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Piston Pump (Propel)
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Swing Bearing - Lubricate
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Piston Motors (Drum Propel and Wheel Propel)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Hydraulic Schematic (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Electrical Schematic (Propel System)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.