Truck Body Mounting
Show/hide table
| |
| Illustration 1 | g03532376 |
Show/hide table
| Specification for 364-2257 Truck Body Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 6V-7676 Nut | Tighten nuts to remove slack.
Again tighten one further turn to set pre-compression. |
| 2 | 2 | 142-1227 Pin As | Diameter is |
| 3 | 6 | 5U-0297 Shim | As required, Use the shims to adjust minimum clearance between pivot lugs and rear chassis.
Assemble the shims in order to fitted to inside faces of outer plate as shown in the illustration 1. Thickness is |
Caterpillar Information System:
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission and Hoist Control
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Tailgate Cylinder
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hydraulic Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Mud Guard
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transfer Gears (Planetary)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Steering Cylinder - Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Control
C13, C15, and C18 Tier 4 Final Engines Radiator
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
2013/12/06 New Procedure to Replace the Front Axle Differential Housing Now Available for R1600G Load Haul Dump Machines {3260}
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Control
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission Hydraulic Control Valve
216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Truck Body Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
16M Series 3 and 18M Series 3 Motor Grader Power Train System
Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260} Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260}
2013/11/27 A New Bracket for the Lockout Hasp Is Available for F Series Backhoe Loaders {1411, 7505}
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Operator Controls (Propel System)