Transmission Hydraulic Control Valve
Show/hide table
| |
| Illustration 1 | g03536916 |
Show/hide table
| Specification for 447-7310 Transmission Hydraulic Control Gp | |||
| Item | Qty | Part | Specification Description |
| - | - | - | Lubricate all seals lightly with lubricant that is being sealed. |
| 1 | 1 | 318-1182 Speed Sensor Gp | Use the following procedure in order to tighten the speed sensor: Align top of tooth with centerline of hole. Insert the sensor until firm contact is made with the tooth. After contact, turn the sensor in a counterclockwise direction by 180 ± 45 degree. Tighten the retaining nut to |
| 2 | 1 | 6V-3940 Bolt | Torque to |
| 3 | 1 | 318-1181 Speed Sensor Gp | Torque to |
| 4 | 1 | Nut | Torque to |
| 5 | 4 | 5P-8347 Bolt | Torque to |
| 6 | 3 | 315-9835 Elbow As | Use the following procedure in order to tighten the elbow: 1. Remove the nipple assembly from 244-3114 Modulating Valve Gp (7). 2. Assemble the adapter into the modulating valve and tighten to 14 ± 4 N·m (10 ± 3 lb ft). 3. Reinstall nipple assembly into the adapter and tighten to 14 ± 4 N·m (10 ± 3 lb ft). |
Show/hide table
| |
| Illustration 2 | g03532864 |
|
View B-B | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 8 | 4 | 8T-0100 Bolt | Torque to |
| 9 | 1 | 134-2252 Temperature Sensor Gp | Torque to |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Control
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Truck Body Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transmission and Hoist Control
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Tailgate Cylinder
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hydraulic Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Mud Guard
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Transfer Gears (Planetary)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Steering Cylinder - Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Control
C13, C15, and C18 Tier 4 Final Engines Radiator
216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 216 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Truck Body Mounting
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Lubrication Lines
16M Series 3 and 18M Series 3 Motor Grader Power Train System
Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260} Procedure to Inspect the Support Assembly on Certain 785C, 785D, 789C, and 789D Off-Highway Trucks{3260}
2013/11/27 A New Bracket for the Lockout Hasp Is Available for F Series Backhoe Loaders {1411, 7505}
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Operator Controls (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Location of Electrical Components (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Location of Hydraulic Components (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems Piston Pump (Propel)