Axle Shaft - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 315-2605     | Handle     | 1     |
315-2607 | Adapter     | 1     | |
B     | -     | Loctite 51049     | -     |
- Remove bolts (1) . Remove cover (2) .
Show/hide table
Illustration 1 | g01624762 |
- Remove ring (3) . Remove gear (4) .
Show/hide table
Illustration 2 | g01624860 |
- Attach Tooling (A) in order to remove axle shaft (5) . The weight of the Tooling (A) and axle shaft (5) is approximately 268 kg (590 lb).
Show/hide table
Illustration 3 | g01624862 |
Show/hide table
Illustration 4 | g01624875 |
- Reposition the lifting device and continue to remove axle shaft (5) .
Show/hide table
Illustration 5 | g01625104 |
Installation Procedure
- Install axle shaft (5) in the reverse order of removal.
- Apply Tooling (B) onto both ends of axle shaft (5) .
Caterpillar Information System:
14L Motor Grader Machine Systems Cab - Remove
14L Motor Grader Machine Systems Cab - Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Control Manifold (Hydraulic Fan)
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Control Manifold (Brake)
988K XE Wheel Loader Machine Systems Steering Control Valve - Disassemble
2013/11/21 Improvement to the Boom Top Plate on Certain Backhoe Loaders {6501}
2013/10/29 New Transmission Software is Available {7610, 7620}
Procedure to Install New Blocks and Bracket Assembly for the Front Nose and Rear Valve Bank Cover on Certain 16M Motor Graders{7150} Procedure to Install New Blocks and Bracket Assembly for the Front Nose and Rear Valve Bank Cover on Certain 16M Motor Graders{7150}
2013/10/24 New Software for the Turbocharger Protection Strategy on the C4.4 Engine {1052, 1920}
2013/12/06 New Procedure to Rework the Existing Front Axle Now Available for R1600G Load Haul Dump Machines {3256, 3258, 3260}
725C Articulated Truck Declaration of Conformity
Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines {108C, 108G} Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines {108C, 108G}
2013/10/24 New Engine Software is Available for Certain 740B and 740B Ejector Articulated Trucks {1920}
2013/12/02 New Blade Mounting Group Wear Strips are Now Available On Certain 24H and 24M Motor Graders {6151}
2014/03/27 New Blade Mounting Group Wear Strips are Now Available On Certain H, K and K Series 2 Motor Graders {6152, 6154, 6155}
2013/11/22 New Blade Mounting Group Wear Strips are Now Available On Certain H, M, and M Series 2 Motor Graders {6151}
725C, 725C2, 730C and 730C2 Articulated Truck Systems General Information (Hydraulic System)
2013/11/11 The Drawbar Assembly Has Been Improved on Certain M and M Series 2 Motor Graders {6153}
2013/11/27 New Spindle for the Front Axle Group Is Used On Certain 16H and 16M Motor Graders {4205, 4313}
777G Off-Highway Truck Hydraulic and Braking System Operational Checks
226 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 226 Skid Steer Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2013/11/15 An Improved Centershift Lock Group Is Now Used on Certain K and K Series 2 Motor Graders {5221}
2014/05/20 An Improved Water Pump Seal Assembly Is Used on Certain Commercial Engines {1361, 7555}
The Final Drive Thrust Washers May Fail on Certain 14M Motor Graders{4050} The Final Drive Thrust Washers May Fail on Certain 14M Motor Graders{4050}