The Operator Advisor Display
The Operator Advisor Display is used to show machine operating information. For a detailed explanation of the operational features and configurable parameters, refer to System Operation, Test and Adjust, RENR6489, " AP600D, AP655D, BG600D and BG655D Asphalt Pavers Monitoring System " or System Operation, Test and Adjust, UENR1231, " AP/BG1000E and AP/BG1055E Asphalt Pavers Monitoring System".
For information on using the "Diagnostics" screen to display diagnostic and event codes refer to Troubleshooting, "Using Advisor to Determine Diagnostic Codes".
 | |
| Illustration 1 | g01372756 |
Home Menu screen of the Operator Advisor Display | |
Caterpillar Electronic Technician (Cat ET)
 | |
| Illustration 2 | g02615483 |
Connections for the Communication Adapter 3 and Caterpillar Electronic Technician (Cat ET) The components that are needed to use the Communication Adapter II and Cat ET to determine diagnostic codes are listed: (1) Current version of Cat ET software (2) 317-7484 Communication adapter Gp (3) Service diagnostic cable (4) Cable | |
Caterpillar Electronic Technician (Cat ET) is a software program that is used to access data. The service technician will use theCat ET in order to perform the maintenance on the vehicle. Some of the options that are available with the Cat ET are listed below:
- Diagnosis of problems
- Viewing diagnostic trouble codes
- Viewing active event codes and logged event codes
- View the status of parameters.
- Clear active diagnostic trouble codes and clear logged diagnostic trouble codes
- Perform calibration of machine systems.
- Program the ECU (Flash) with the "WINflash" program. Refer toTesting and Adjusting, "Electronic Control Unit - Flash Program".
- Print reports.
See Troubleshooting, "Determining Diagnostic Trouble Codes". Diagnostic information is accessed with the following drop-down menus:
- Active diagnostic trouble codes
- Logged diagnostic trouble codes