Start By:
- Release system pressure.
- Remove transport guard.
 |
|
Accidental machine starting can cause injury or death to personnel working on the machine. To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps. Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on. |
|
|
Personal injury can result from rotating and moving parts. Stay clear of all rotating and moving parts. Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified. The machine must be parked on a level surface and the engine stopped. |
- Remove bolt (1) and saw disc tooth (2).
| |
| Illustration 1 | g02648796 |
Note: When you replace teeth, purchase the teeth only in pairs. Install the teeth on opposite sides (180°) of the disc saw to each other. Replace all excessively worn teeth at the same time. Otherwise, an unbalanced load could occur.
- Install saw disc tooth (2) in the reverse order of removal.
- Tighten bolt (1) to a torque of
135 ± 20 kg (298 ± 44 lb) .
- Tighten bolt (1) to a torque of