1998/11/02 Caterpillar


New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}

Usage:


C-10 (2PN, 8YS),
C-12 (1YN, 9NS),
3176B (9CK, 3NL, 9WK),
3306B (5KD, 63Z),
3306C (2AZ, 7RJ, 9TL, 3KS),
3406B (4MG, 5KJ, 7FB, 8TC, 5YG, 3ZJ, 2EK, 4CK, 7XC),
3406C (5KJ, 3ZJ, 4CK, 8PN),
3406E (5EK, 6TS, 5DS, 1LW, 4AS) Truck Engines D35HP (3FD) D400 (1MD) Articulated Trucks with 3406B (6TB) Engines

Warranty Category: G

Feature/Benefits

* Essential Tool
* Used to quickly and accurately install or service Jake Brake
* ® Units on Caterpillar On-Highway Truck Engines and articulated trucks
* All tools are genuine OEM parts
* Tools can be ordered individually
* 149-6112 Trigger Upgrade Kit allows rotation of dial indicator in early trigger sets kits
* 143-6452 Fuel Line Protective Kit includes caps to seal fuel lines from contamination during a retrofit (for 3406B and C Engines only)
* 149-6111 Oil Pressure Test Kit includes a solenoid valve o-ring pack (pack not available separately). Individual o-rings are available by ordering: 2U-1493 Seal Ring, Lower, 2U-1492 Seal Ring, Middle, and 143-6642 Seal Ring, Upper


Service Tools for Jacobs Vehicle Systems (Jake Brake®)

(1) Service Tools for Jacobs Vehicle Systems (Jake Brake®)
(2) 134-2836 Gauge, Feeler 1.70 mm (.067 in)1
149-0054 Gauge, Adjusting 0.46 mm (.018 in)1
149-6105 Gauge, Adjusting 2.03 mm (.080 in)1
149-0050 Gauge, Adjusting 2.29 mm (.090 in)1
(3) 149-0059 Gauge, S/P Adjusting 3.43 mm (.135 in)1
(4) 149-0053 Gauge, Feeler 1.52 mm (.060 in)1
149-0052 Gauge, Feeler 1.78 mm (.070 in)1
(5) 149-0055 Gauge, Feeler 0.51 mm (.020 in)1
149-6114 Gauge, Feeler 0.64 mm (.025 in)1
149-0056 Gauge, Feeler 1.14 mm (.045 in)1150-7227 Gauge, Feeler 1.02 mm (.040 in)1
149-0058 Gauge, Feeler 1.27 mm (.050 in)1
(6) 134-2837 Tool, Slave Piston
(7) 149-6113 Bridge Set Gauge Package1
(8) 149-0114 Gauge, Slave Lash 0.889 mm (.035 in)1
(9) 149-6110 Wedge, M/P Holding2
(10) 149-0051 Gauge, Feeler 2.03 mm (.080 in)1
(11) 149-6109 Trigger Adjusting Group with Dial Indicator
(12) 150-3618 Solenoid Valve, Pressure Test3
(13) 150-3617 Adapter, Pressure Test3
(14) 150-3616 Body, C/V Pressure Test3
(15) 149-6104 Extractor, Dowel1
(16) 150-3619 Removal Tool, C/V Cover3
(17) 149-0028 Gauge, Feeler 0.69 mm (.027 in)1
149-0049 Gauge, Feeler 0.76 mm (.030 in)1
155-5238 Gauge, Feeler 0.84 mm (.033 in)1
155-5239 Gauge, Feeler 0.94 mm (.037 in)1

Not shown:
149-6106 Tool Kit, Cat
149-6107 Tool Box1
149-6111 Oil Pressure Test Ki
149-6112 Trigger Adjusting Group Upgrade Kit
143-6452 Kit, Fuel Line Protective1
150-7145 Pressure Gauge 0 to 700 kPa3
1Part of 149-6106 Tool Kit-Cat
2Part of 149-6109 Trigger Adjusting Group
3Part of 149-6111 Oil Pressure Test Kit

Caterpillar Information System:

1998/10/26 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available{4450}
1998/10/19 New 154-4615, 154-4617, And 154/4626 (For Australia) Air Conditioning Recovery/Recycling Units {0708}
1998/10/12 Use 149-2879 Hydraulic Pin Remover Group For Horizontal And Vertical Bucket Pins{6822,6108}
1998/10/12 Use 149-0173 Chocker Style Fabric Basket And 149-0174 Non-Chocker Style Fabric Baskets On Ground Engaging Tools{0632,6800}
1998/10/12 Maximizing Off-Highway Truck Brake System Life And Improving Reliability{4250,4255}
1998/09/28 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/14 Use 125-5597 Mounting Bar To Disassemble And Assemble Marine Heat Exchanger{1379}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/07 New Serial Number Prefix {0374}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/24 Proper Mounting Of Electrical Arc Suppressors {1408,4466}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Use Fabricated Tools To Disassemble And Assemble 144-0835 High Pressure Oil Supply Pump On HEUI Engines {1304}
1998/11/23 Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/23 New 158-4991 Cat Mini Multi-Tool Now Available {1404}
1998/11/30 Proper Flushing And Charging Of Air Conditioner Refrigerant System {7320}
1998/12/07 Identification Of External Terminals On Alternators {1405,1406,1400}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.