Use 125-5597 Mounting Bar To Disassemble And Assemble Marine Heat Exchanger{1379}
Usage:
3406E (9WR) Marine Engine
Warranty: G
Features/Benefits
-
- * Used to hold heat exchanger plates in alignment during disassembly and assembly
- * Makes repair work faster and easier
- * Used to hold heat exchanger plates in alignment during disassembly and assembly
Specifications/Technical Information
- Hex end - 3/4 inch
- Outside diameter - 29.75 mm (1.17 in)
- Threaded end - 1/2
- Outside diameter - 29.75 mm (1.17 in)
125-5597 Mounting Bar
Caterpillar Information System:
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/07 New Serial Number Prefix {0374}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/24 Proper Mounting Of Electrical Arc Suppressors {1408,4466}
1998/08/17 Use 148-9610 Personal Computer Cart To Hold PC, Monitor, Printer, And Data View Hardware {7600}
1998/08/17 Heavy Duty, High Intensity Flashlights 149-8322 Flashlight 149-8331 Flashlight 149-8333 Flashlight 149-8334 Flashlight 149-8335 Flashlight 149-8327 Helmet Light Holder {0701}
1998/08/17 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}
1998/08/17 Use 148-9704 Seal Installers For High Pressure Aftercoolers {1063,7555}
1998/08/17 Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance {1000,1000,0701}
1998/08/17 Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17 Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/09/28 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/10/12 Maximizing Off-Highway Truck Brake System Life And Improving Reliability{4250,4255}
1998/10/12 Use 149-0173 Chocker Style Fabric Basket And 149-0174 Non-Chocker Style Fabric Baskets On Ground Engaging Tools{0632,6800}
1998/10/12 Use 149-2879 Hydraulic Pin Remover Group For Horizontal And Vertical Bucket Pins{6822,6108}
1998/10/19 New 154-4615, 154-4617, And 154/4626 (For Australia) Air Conditioning Recovery/Recycling Units {0708}
1998/10/26 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available{4450}
1998/11/02 New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Use Fabricated Tools To Disassemble And Assemble 144-0835 High Pressure Oil Supply Pump On HEUI Engines {1304}