Use 149-2879 Hydraulic Pin Remover Group For Horizontal And Vertical Bucket Pins{6822,6108}
Usage:
Ground Engaging Tools (GET)
Warranty: G
Features/Benefits
-
- * Used to remove horizontal or vertical bucket pins (edge protector, J350-J400, and J450-J550 pins)
- * Provides up to 10 tons of removal force
- * J-style adapters hook to rear edge of tooth (provides positioning and retention while removing pins)
- * Adjustable positioning bolt assists in alignment of repetitive tooth pin removal
- * Three adapters for different size pins (150-6632 Flat Adapter for edge protector pins; 149-2883 for J350-J400 pins; 149-2884 for J450-J550 pins)
- * Used to remove horizontal or vertical bucket pins (edge protector, J350-J400, and J450-J550 pins)
Specifications/Technical Information
- Pin length (maximum) - 171.5 mm (6.75 in)
- Throat depth (maximum) - 154.0 mm (6.06 in)
- Pin diameter (maximum) - 22.1 mm (.87 in)
- Tooth spacing minimum clearance - 211.0 mm (8.31 in)
- Throat depth (maximum) - 154.0 mm (6.06 in)
149-2879 Tooth Pin (Medium Bucket) Remover Group
Caterpillar Information System:
1998/10/12 Use 149-0173 Chocker Style Fabric Basket And 149-0174 Non-Chocker Style Fabric Baskets On Ground Engaging Tools{0632,6800}
1998/10/12 Maximizing Off-Highway Truck Brake System Life And Improving Reliability{4250,4255}
1998/09/28 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/14 Use 125-5597 Mounting Bar To Disassemble And Assemble Marine Heat Exchanger{1379}
1998/09/14 New 1U-8660 Hydraulic Unit Boring Bar, 9U-5730 Portable Boring Bar (110 Volt), And 9U-5889 Portable Boring Bar (220 Volt) Now Available{0679}
1998/09/07 New Serial Number Prefix {0374}
1998/09/07 The Cloud Point Specification In The Chart, "Specifications For Distillate Fuel," Has Changed In Certain Publications {1250,1280,0375}
1998/08/31 Special Instruction, REHS0280, "Installation And Removal Of The Mechanically Attached Wear Plate System" Is Available {0374,6120,6820}
1998/08/24 Proper Mounting Of Electrical Arc Suppressors {1408,4466}
1998/08/17 Use 148-9610 Personal Computer Cart To Hold PC, Monitor, Printer, And Data View Hardware {7600}
1998/08/17 Heavy Duty, High Intensity Flashlights 149-8322 Flashlight 149-8331 Flashlight 149-8333 Flashlight 149-8334 Flashlight 149-8335 Flashlight 149-8327 Helmet Light Holder {0701}
1998/08/17 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}
1998/10/19 New 154-4615, 154-4617, And 154/4626 (For Australia) Air Conditioning Recovery/Recycling Units {0708}
1998/10/26 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available{4450}
1998/11/02 New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Use Fabricated Tools To Disassemble And Assemble 144-0835 High Pressure Oil Supply Pump On HEUI Engines {1304}
1998/11/23 Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}