Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
Usage:
G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines
Warranty: G
Features/Benefits
-
- * Used to test prechamber check valves for leakage.
- * When 827 kPa (120 psi) air pressure is applied, pressure cannot leak down below 689 kPa (100 psi) within five seconds.
- * Used with external compressed air supply, air pressure gauge with a maximum 1378 kPa (200 psi) capacity, and quick action shut-off valve.
- * 143-8997 Check (Dummy) Valve is used to verify that leak down check tool does not have any leaks.
- * A 2M-4453 Seal, O-Ring is included with leak down check tool and is a serviceable part.
- * When connecting air supply, it must be as close as possible [within 300 mm (12 in) max] to inlet side of air pressure gauge.
- * Used to test prechamber check valves for leakage.
Specifications/Technical Information
- Max air pressure (pressure gauge) - 1378 kPa (200 psi).
- .
Caterpillar Information System:
1998/03/23 Use 155-3046 Hex Socket To Remove And Install TPS 57D Turbocharger Band Clamps{1056}
1998/03/23 Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23 Use 140-2266 Harness Assembly (70-Pin Breakout "T") For Testing And Adjusting{1900,0781}
1998/03/09 Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09 Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09 New Hardened Washer Improves Seat Suspension Service Life{7324}
1998/03/02 Use 139-2788 Ferrule (AWG 24-12) And 139-2789 Ferrule (AWG 10-6) Crimp Tools For Repairing 3500 SR4B Generator Wiring Harness {1403}
1998/03/02 Use 140-9944 Terminal Kit To Repair Wiring Harness {1400,0700}
1998/02/09 Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}
1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}
1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/30 Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30 Use 7X-1703 Adapter Group For Mounting 7X-1700 Communication Adapter On 8T-8697 ECAP {1900,0781}
1998/03/30 Use 9U-6803 Tester For Hydraulic Cylinders {7562}
1998/03/30 Use 137-2700 Bore Welding Group (110V), 138-8215 Bore Welding Group (110V With Auto-Skip), 138-8212 Bore Welding Group (220V) And 138-8213 Bore Welding Group (220V With Auto-Skip) For Building Up Worn Or Damaged Bores {0672}
1998/03/30 Use Measuring Tools For Crimp Diameter {0700}
1998/03/30 Use 1U-6189 Lamp Tool For Removal And Installation Of Small Control Panel Bulbs {1400,0709}
1998/03/30 Use 136-3642 Crimp Tool Group For 4C-9900 And 6V-4900 Presses {5057}