1998/03/02 Caterpillar

Use 140-9944 Terminal Kit To Repair Wiring Harness {1400,0700}

Usage:

All Caterpillar Engines

Features/Benefits

* Replaces canceled 1P-2305 Terminal Kit

* Used to repair wiring harness terminal ends which have become damaged or unserviceable

* Hand crimping tool has built-in dies for crimping insulated and non-insulated terminals, cutting edges for cutting wire, notches for stripping 10 to 22 gauge wire, shears for cutting up to 4.7 mm (.18 in) diameter bolts, two thread chasers for screws with 24 and 32 threads-per-inch screws, and a scale for measuring screw length

* Splice connectors have hot-melt adhesive and shrink ends that when heated will provide an environmental seal around wire

Service Parts

Terminal And Wire Splice Parts

1 9S-9150 Terminal Crimp Tool 1

10 2L-8058 Terminal (8 Ga. 1/4 in. Stud) 10

10 2L-8066 Terminal (12-10 Ga. No. 10 Stud) 10

10 2L-8067 Terminal (12-10 Ga. 1/4 in. Stud) 10

10 2L-8069 Terminal (12-10 Ga. 3/8 in. Stud) 10

10 2L-8071 Terminal (12-10 Ga. 1/2 in. Stud) 10

20 2L-8075 Terminal (16-14 Ga. No. 8 Stud) 20

20 2L-8076 Terminal (16-14 Ga. No. 10 Stud) 20

15 2L-8077 Terminal (16-14 Ga. 1/4 in. Stud) 15

15 2L-8079 Terminal (16-14 Ga. 3/8 in. Stud) 15

30 5P-4571 Terminal (16-14 Ga.) 20

10 4S-1988 Terminal (Blade, Crimp Type) 50

15 136-4876 Wire Splice (12-10 Ga.) 1

15 136-4877 Wire Splice (16-14 Ga.) 1

15 136-4878 Wire Splice (22-18 Ga.) 1

140-9944 Terminal Kit

Caterpillar Information System:

1998/02/09 Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}

1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}

1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}

1998/02/09 Replacements Products Available For 4C-4079 Brake And Component Cleaner {0680}

1998/02/09 8N-4617 Air Cleaner Clamp Kit Available {1051}

1998/02/02 Machine Flash Software (Non-Engine Software) Ordered Through The Parts Distribution System Is Now Available Through The Corporate Mail Box {1900,1920}

1998/01/26 Caterpillar Electronic Technician (ET) Training Video Available {0374}

1998/01/26 Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}

1998/01/26 The 154-6732 Pump Kit Is Available To Help Service The Unit Injector Hydraulic Pump Group On 3408E (99C) And 3412E (80M) Machine Engines {1714}

1998/01/19 Use 1U-9500 Flow Communicator On Caterpillar Diagnostic Tools{1250,0782}

1998/01/19 Use 126-7175 Push Puller Assembly For Various General Purpose Applications{0600}

1998/01/19 Improved Alpha-Numeric SMCS (Service Management Control System) Component Codes Allow For Future Expansion Of System Categories{0374}

1998/03/02 Use 139-2788 Ferrule (AWG 24-12) And 139-2789 Ferrule (AWG 10-6) Crimp Tools For Repairing 3500 SR4B Generator Wiring Harness {1403}

1998/03/09 New Hardened Washer Improves Seat Suspension Service Life{7324}

1998/03/09 Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}

1998/03/09 Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}

1998/03/23 Use 140-2266 Harness Assembly (70-Pin Breakout "T") For Testing And Adjusting{1900,0781}

1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}

1998/03/23 Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}

1998/03/23 Use 155-3046 Hex Socket To Remove And Install TPS 57D Turbocharger Band Clamps{1056}

1998/03/23 Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}

1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}

1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}

1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}