Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
Usage:
3500A Diesel, 3500B Diesel, 3500 Magneto, EIS Gas Engines
Warranty: G
Features/Benefits
-
- * Used to accurately set engine valve lash with factory setting methods.
- * Installation of tools is quick and easy with adjustment of indicator position required on initial set-up only.
- * Removal of fuel lines not necessary to measure valve lash.
- * Adding 147-2058 Extension to indicator allows valve lash to be measured on Magneto Gas engine without removing spark plug extension.
- * Socket and torque wrench used to torque rocker arm nuts are preset at factory to 70 N·m (52 ft.lbs.) - weight of torque wrench alone sets value of valve lash
- * Valve bridge adjustment can be made without removing the rocker arm. Use the 147-5536 Contact Point, 147-2058 Extension and 148-7211 Socket to make the adjustment.
- * A slide rule type torque computer, Form SEHS7150, is available to determine torque wrench dial reading for different extensions.
- * This tool will not fit on some early 3500 Engines with old fuel manifolds.
- * Dial Indicator is not included in group - choice of 147-2056 (in) or 147-5537 (mm) is available .
- * Used to accurately set engine valve lash with factory setting methods.
147-5482 Valve Lash Adjustment Group
Reference: Special Instruction; REHS0128; Using the 147-5482 Indicator Guage Group For Valve Lash And Valve Bridge Adjustment.
Caterpillar Information System:
1998/03/23 Use 140-2266 Harness Assembly (70-Pin Breakout "T") For Testing And Adjusting{1900,0781}
1998/03/09 Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09 Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09 New Hardened Washer Improves Seat Suspension Service Life{7324}
1998/03/02 Use 139-2788 Ferrule (AWG 24-12) And 139-2789 Ferrule (AWG 10-6) Crimp Tools For Repairing 3500 SR4B Generator Wiring Harness {1403}
1998/03/02 Use 140-9944 Terminal Kit To Repair Wiring Harness {1400,0700}
1998/02/09 Replacement Available For 7M-7260 Liquid Gasket {0648,0649,0651}
1998/02/09 Proper Reading Of LCD Service Meters {7450,7478,7480}
1998/02/09 New Shaft Seals Available For Gear Type Hydraulic Pump Groups To Prevent Leakage {5073}
1998/02/09 Replacements Products Available For 4C-4079 Brake And Component Cleaner {0680}
1998/02/09 8N-4617 Air Cleaner Clamp Kit Available {1051}
1998/02/02 Machine Flash Software (Non-Engine Software) Ordered Through The Parts Distribution System Is Now Available Through The Corporate Mail Box {1900,1920}
1998/03/23 Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23 Use 155-3046 Hex Socket To Remove And Install TPS 57D Turbocharger Band Clamps{1056}
1998/03/23 Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/30 Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30 Use 7X-1703 Adapter Group For Mounting 7X-1700 Communication Adapter On 8T-8697 ECAP {1900,0781}
1998/03/30 Use 9U-6803 Tester For Hydraulic Cylinders {7562}
1998/03/30 Use 137-2700 Bore Welding Group (110V), 138-8215 Bore Welding Group (110V With Auto-Skip), 138-8212 Bore Welding Group (220V) And 138-8213 Bore Welding Group (220V With Auto-Skip) For Building Up Worn Or Damaged Bores {0672}