Heater Core - Remove and Install
Removal Procedure
Start By:
- Remove the heating and air conditioning unit.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Disconnect harness assemblies (1) and (2) .
Show/hide table
Illustration 1 | g01187597 |
- Remove bolts (3) .
Show/hide table
Illustration 2 | g01187598 |
- Separate case (4) from case (5) .
Show/hide table
Illustration 3 | g01187599 |
- Remove clips (6), (7), and (8) .
Show/hide table
Illustration 4 | g01187600 |
- Disconnect coolant temperature sensor (9) .
Show/hide table
Illustration 5 | g01187601 |
- Remove bolts (10) and place cover assembly (11) aside.
Show/hide table
Illustration 6 | g01187603 |
- Remove bolt (14) and disconnect lever assembly (12) .
Show/hide table
Illustration 7 | g01187604 |
- Remove bolt (15) and disconnect lever assembly (13) .
- Place lever assemblies (12) and (13) aside.
Show/hide table
Illustration 8 | g01187605 |
- Remove heater core (16) .
Installation Procedure
- Install heater core (16) in the reverse order of removal.
End By: Install heating and air conditioning unit.
Caterpillar Information System:
826K Landfill Compactor Window Washer Reservoir - Fill
Improved Installation Procedure For The 368-2777 Exhaust Pipe As on Certain Articulated Trucks {1062} Improved Installation Procedure For The 368-2777 Exhaust Pipe As on Certain Articulated Trucks {1062}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Left Brake Pedal)
MH3049 Material Handler Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Install
826K Landfill Compactor Service Brake Wear Indicator - Check
986H Wheel Loader Trunnion Support (Oscillating Axle, Front) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
24M Motor Grader Braking and Hydraulic Fan System Parking Brake Control
MH3049 Material Handler Machine Systems Heating and Air Conditioning Unit - Remove and Install
988K XE Wheel Loader Power Train Final Drive Planetary - Remove and Install
MH3049 Material Handler Machine Systems Seat Suspension - Remove and Install
AP300D and AS3173 Asphalt Pavers Machine Electrical System CAN Data Link - Test
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valve (Parking Brake)
Rerouting of Heater Hoses{1812, 7304} Rerouting of Heater Hoses{1812, 7304}
826K Landfill Compactor Window Wiper - Inspect/Replace
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13 Tier 4 Final Engines Air Precleaner
C13 Tier 4 Final Engines Air Precleaner
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13 Tier 4 Final Engines Electronic Unit Injector
C13, C15, and C18 Tier 4 Final Engines Air Starting Motor