966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Position Sensor (Left Brake Pedal)

Usage:

972M XE AN3


Illustration 1g03368352
Position Sensor (Left Brake Pedal)

The position sensor for the left brake pedal sends an input to the ECM. The sensor will continuously update the power train ECM on the position of the left pedal. The ECM records the change of position. Then, the ECM activates the appropriate solenoid valve.

The position sensor for the left brake pedal is a PWM sensor. The sensor continuously generates a PWM signal. The duty cycle varies in proportion to the position of the pedal. The ECM receives the PWM signal from the position sensor. The ECM measures the duty cycle in order to determine the position of the pedal. The frequency of the sensor signal is constant at 500 Hz. The machine electrical system provides +battery voltage to the pedal position sensor for operating power.

Caterpillar Information System:

MH3049 Material Handler Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Install
826K Landfill Compactor Service Brake Wear Indicator - Check
986H Wheel Loader Trunnion Support (Oscillating Axle, Front) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
24M Motor Grader Braking and Hydraulic Fan System Parking Brake Control
MH3049 Material Handler Machine Systems Heating and Air Conditioning Unit - Remove and Install
988K XE Wheel Loader Power Train Final Drive Planetary - Remove and Install
MH3049 Material Handler Machine Systems Seat Suspension - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
826K Landfill Compactor Backup Alarm - Test
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Disassemble
Improved Installation Procedure For The 368-2777 Exhaust Pipe As on Certain Articulated Trucks {1062} Improved Installation Procedure For The 368-2777 Exhaust Pipe As on Certain Articulated Trucks {1062}
826K Landfill Compactor Window Washer Reservoir - Fill
MH3049 Material Handler Machine Systems Heater Core - Remove and Install
AP300D and AS3173 Asphalt Pavers Machine Electrical System CAN Data Link - Test
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valve (Parking Brake)
Rerouting of Heater Hoses{1812, 7304} Rerouting of Heater Hoses{1812, 7304}
826K Landfill Compactor Window Wiper - Inspect/Replace
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13 Tier 4 Final Engines Air Precleaner
C13 Tier 4 Final Engines Air Precleaner
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.