Improved Installation Procedure For The 368-2777 Exhaust Pipe As on Certain Articulated Trucks {1062}
- Articulated Truck
- 735B (S/N: L4D1-UP)
- 735C (S/N: LFJ1-UP)
- 740B (S/N: L4E1-UP)
- 745C (S/N: LFK1-UP)
- 735C (S/N: LFJ1-UP)
- Ejector Truck
- 740B EJECTOR (S/N: L4F1-UP)
- 740C EJECTOR (S/N: LFN1-UP)
Introduction
The following information details the alignment and installation procedure for the 368-2777 Exhaust Pipe As. This process should be adhered to when refitting or replacing the 368-2777 Exhaust Pipe As in the field.
Required Parts
Show/hide table
Required Parts | |||
Item | Qty | Part Number | Description |
1 | 1 | Exhaust Pipe As |
Installation of Exhaust Pipe Assembly
- Align both pipes being connected by 368-2777 Exhaust Pipe As.
Note: Fit the Strip Wound Flex portion of the pipe in a straight line and in the mid stretch position.
- Strip Wound Flex portion of pipe can extend and compress. The flex should be extended midway between fully compressed and the fully stretched position. To extend the flex pipe to the mid position, follow the steps below.
- Start with the flexible section of the pipe fully compressed.
Show/hide table
Illustration 1 g03368650 - Bend the flexible section of pipe by hand as seen in Illustration 1.
Show/hide table
Illustration 2 g03368661 - Place the bent section of pipe on a flat surface and apply light force to straighten the pipe. This procedure will set the flex pipe to the mid point of stretch. The pipe is now ready for installation.
Show/hide tableIllustration 3 g03368657 - Start with the flexible section of the pipe fully compressed.
- Install the Exhaust Pipe Assembly and check for flex pipe straightness with a straight edge.
The improved installation procedure for the 368-2777 Exhaust Pipe As is adaptable to the following machines:
- 735B (S/N: L4D1-436)
- 740B (S/N: L4E1-2337)
- 740B EJ (S/N: L4F1-444)
The improved installation procedure for the 368-2777 Exhaust Pipe As is effective in production on the following machines:
- 735B (S/N: L4D437-UP)
- 740B (S/N: L4E2338-UP)
- 740B EJ (S/N: L4F445-UP)
- 735C (S/N: LFJ1-UP)
- 745C (S/N: LFK1-UP)
- 740C EJ (S/N: LFN1-UP)
Caterpillar Information System:
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Left Brake Pedal)
MH3049 Material Handler Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Install
826K Landfill Compactor Service Brake Wear Indicator - Check
986H Wheel Loader Trunnion Support (Oscillating Axle, Front) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
24M Motor Grader Braking and Hydraulic Fan System Parking Brake Control
MH3049 Material Handler Machine Systems Heating and Air Conditioning Unit - Remove and Install
988K XE Wheel Loader Power Train Final Drive Planetary - Remove and Install
MH3049 Material Handler Machine Systems Seat Suspension - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
826K Landfill Compactor Backup Alarm - Test
826K Landfill Compactor Window Washer Reservoir - Fill
MH3049 Material Handler Machine Systems Heater Core - Remove and Install
AP300D and AS3173 Asphalt Pavers Machine Electrical System CAN Data Link - Test
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valve (Parking Brake)
Rerouting of Heater Hoses{1812, 7304} Rerouting of Heater Hoses{1812, 7304}
826K Landfill Compactor Window Wiper - Inspect/Replace
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13 Tier 4 Final Engines Air Precleaner
C13 Tier 4 Final Engines Air Precleaner
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator