1996/07/01 Caterpillar

New Stop/Tail Lamp Groups Available {1429}

Usage:

Machines Using the 3E-6467 Lamp Group Or The 8C-6207 Lamp Group

Description of Change: Two new stop/tail lamp groups are available. The new lamp groups are more resistant to shock and vibration damage. They use a single filament bulb and have improved vibration dampening which provides longer life. Internal circuitry provides the two levels of illumination for stop and tail light functions.

Adaptable To: The new 130-3452 Lamp Group can directly replace the former 8C-6207 Lamp Group. The new 130-3453 Lamp Group can directly replace the former 3E-6467 Lamp Group. The only difference between the two new lamp groups is the 130-3452 Lamp Group has a Sure Seal® connector while the 130-3453 Lamp Group has a Deutsch® DT connector. Both new lamp groups use a 9X-4493 replacement bulb. The 3E-6467 and 8C-6207 Lamp Groups continue to be serviced. The chart lists the above information.

Caterpillar Information System:

1996/06/17 Tamper-Proof Caps Available For Hydraulic Implement Pump Groups{5073}

1996/06/10 New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}

1996/06/10 New Ring Seal Material Used In Brake Groups For Improved Service Life {7555,4251}

1996/06/03 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}

1996/06/03 U-Cup Rod Seals Available For Hydraulic Cylinders Used In Cold Temperatures{5102,5104}

1996/05/06 Starter Solenoid Assembly May Need New Terminal {1467,1518}

1996/04/29 New Element Assemblies Available Within Jacket Water Heater Groups{1383}

1996/04/29 Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}

1996/04/15 New Element Assemblies Available Within Jacket Water Heater Groups{1383}

1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}

1996/04/01 New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches {4469}

1996/03/18 Hose Cleaner Group And Tool Operating Manual Is Available {0600,5057}

1996/07/01 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}

1996/08/26 Explanation of "Pull Up Voltage" {0350}

1996/09/02 Improved Starter Solenoid Assemblies Available {1467,1518}

1996/09/16 Snap Ring Retains Rod Wiper Seal In Several Hydraulic Cylinder Groups {7562,4303,5102,5104,5105,5106,5108,5141,5303,5352,5356,5452,5457,5458,5468,5555}

1996/09/16 Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}

1996/09/16 Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}

1996/09/30 New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}

1996/10/07 Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}

1996/11/18 Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}

1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}

1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}

1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}