1996/06/03 Caterpillar


U-Cup Rod Seals Available For Hydraulic Cylinders Used In Cold Temperatures{5102,5104}

Usage:


Caterpillar Machines Using Standard U-Cup Seals On Hydraulic Cylinders

Cold temperature U-cup seals are available for use in extremely cold temperatures. The cold temperature seals use a stainless steel spring to keep the seal lip in contact with the cylinder rod. This prevents leakage during cold start-up.

The cold temperature U-cup seals are available for hydraulic cylinders using standard U-cup seals. See illustration and chart for standard and cold temperature U-cup seals.


Location of U-cup seal. U-cup seal (B). Reference only: Buffer seal (A) and wiper seal (C).

Caterpillar Information System:

1996/05/06 Starter Solenoid Assembly May Need New Terminal {1467,1518}
1996/04/29 New Element Assemblies Available Within Jacket Water Heater Groups{1383}
1996/04/29 Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/15 New Element Assemblies Available Within Jacket Water Heater Groups{1383}
1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}
1996/04/01 New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches {4469}
1996/03/18 Hose Cleaner Group And Tool Operating Manual Is Available {0600,5057}
1996/03/18 Special Instruction SEHS9824 Available For Cab Window Service Procedure {7310}
1996/03/11 Working Load Limits For Forcing Screws, Puller Bolts and Studs{0700}
1996/02/12 New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/01/22 Governor Spring Guide Press Depth{1287,1284}
1996/01/22 Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/06/03 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/10 New Ring Seal Material Used In Brake Groups For Improved Service Life {7555,4251}
1996/06/10 New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/17 Tamper-Proof Caps Available For Hydraulic Implement Pump Groups{5073}
1996/07/01 New Stop/Tail Lamp Groups Available {1429}
1996/07/01 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}
1996/08/26 Explanation of "Pull Up Voltage" {0350}
1996/09/02 Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/16 Snap Ring Retains Rod Wiper Seal In Several Hydraulic Cylinder Groups {7562,4303,5102,5104,5105,5106,5108,5141,5303,5352,5356,5452,5457,5458,5468,5555}
1996/09/16 Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16 Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/30 New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.