C9.3 Engines for Caterpillar Built Machines Caterpillar

Diesel Exhaust Fluid Module - Assemble

Usage:

D6T 2B3

Assembly Procedure

Show/hide table

Table 1
Required Tools
Tool	Part Number	Part Description	Qty
A	-	Distilled Water	-
		De-ionized Water
		Diesel Exhaust Fluid (DEF)

Show/hide table




Illustration 1	g06003622

Note: DEF pump coolant connectors (46) and DEF pump connectors (47) must be installed in the original location when removed. DEF pump coolant connectors (46) and DEF pump connectors (47) are not interchangeable.

Install the O-ring seals (not shown) .Install DEF pump coolant connectors (46) and DEF pump connectors (47).
Tighten DEF pump coolant connectors (46) to a torque of 5.5 ± 0.5 N·m (48 ± 4 lb in).
Tighten DEF pump connectors (47) to a torque of 4.5 ± 0.5 N·m (40 ± 4 lb in).
Show/hide table

Illustration 2 g03366053
Install harness assembly (44) and cable straps (45).
Show/hide table

Illustration 3 g03366046

Note: Do not use an impact on bolts (41).
Install pump (43) in support assembly (42)
. Install bolts (41). Tighten bolts (41) to a torque of 19 ± 2 N·m (168 ± 18 lb in).
Show/hide table

Illustration 4 g03366035
Connect harness assembly (40).
Show/hide table

Illustration 5 g03366015

Note: Do not use an impact on bolts (39).
Install bracket (37), bolts (39), and cable straps (38).
Show/hide table

Illustration 6 g03383610
Install filter (36).
Show/hide table

Illustration 7 g03383609
Install expansion device (35).
Show/hide table

Illustration 8 g03383608
Install cover (34). Tighten cover (34) to a torque of 20 ± 5 N·m (177 ± 44 lb in).
Show/hide table

Illustration 9 g03365554
Install electronic control (31).
Install cable straps (32) and connect harness assembly (33).
Show/hide table

Illustration 10 g03365547
Install control module (30) and bolts (29). Tighten bolts (29) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Show/hide table

Illustration 11 g03365540

Note: Do not use an impact on the bolts for relays (28).
Install relays (28).
Show/hide table

Illustration 12 g03365528

Note: Do not use an impact on the bolts for solenoid assembly (27).
Install solenoid assembly (27) and connect harness assembly (26).
Show/hide table

Illustration 13 g03365521
Install plug (24) and plug (25) on manifold (22).
Install O-ring seals (23) in cap (21).
Show/hide table

Illustration 14 g03365514

Note: Do not use an impact on bolts (19).
Install manifold (20), bolts (19), cap (17), bolts (18). Tighten bolts (18) to a torque of 6 ± 1 N·m (53 ± 9 lb in)
Show/hide table

Illustration 15 g03365493
Install bracket (16) on the tank.
Install bolts (15).
Show/hide table

Illustration 16 g03365477
Install pump assembly (14) and bolts (13).
Show/hide table

Illustration 17 g03365475

Note: Do not use an impact on bolt (12).
Install bolt (12). Tighten bolt (12) to a torque of 4 ± 1 N·m (35 ± 9 lb in)
Show/hide table

Illustration 18 g03365468
Install bolts (11).
Show/hide table

Illustration 19 g03365465
Install the gasket (not shown), manifold (10), plate (9), and bolts (8). Tighten bolts (8) in an alternating sequence to a torque of 5 ± 1 N·m (44 ± 9 lb in). Tighten bolts (8) a second time in an alternating sequence to a torque of 5 ± 1 N·m (44 ± 9 lb in).
Show/hide table

Illustration 20 g03365463
Connect harness assembly (7) and install cable straps (6).
Show/hide table

Illustration 21 g03365452

Note: Do not use an impact on the bolts for clips (1) and (5).
Install hoses (3). Apply Tooling (A) to the O-rings (not shown) inside hose assemblies (4). Connect hose assemblies (4) and harness assemblies (2). Install clips (1). Tighten the bolts for clips (1) to a torque of 6 ± 1 N·m (53 ± 9 lb in). Install clips (5).
Show/hide table

Illustration 22 g06040545

Show/hide table

Illustration 23 g03376333
Install tank (50) in support assembly (51).
Install straps (52) and nuts (53). Tighten nuts (53) to a torque of 8 ± 2 N·m (71 ± 18 lb in). Torque nuts (53) to a final torque of 11 ± 1 N·m (97 ± 9 lb in).
Note: Only apply torque once to nuts (53) when tightening straps (52). Apply torque to nuts (53) in the W, X, Y, Z sequence shown in Illustration 23.
Note: Two types of straps are used to support different tank configurations. Only apply torque once to the nuts on both types of straps.
Show/hide table

Illustration 24 g06040542
Install bracket (48) and hose assembly (49).