Rear Axle - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 8S-7615 | 销 | 2 |
| 4C-7640 | 台架 | 2 | |
| 8S-7611 | 管路 | 2 | |
| B | 1U-7505 | 液压千斤顶 | 1 |
- 用适当的链条将后车桥组件 (7) 连接到工具 (B) 上。 后车桥组件 (7) 的重量约为 750 kg (1655 lb)。
Show/hide table
 | |
| 图 1 | g01643877 |
注: 典型示例。
Show/hide table
 | |
| 图 2 | g03340582 |
- 安装后车桥组件 (7) 和螺栓 (13) 。 对于另一侧，重复本步骤。
- 安装盖 (12) 。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 3 | g03340588 |
- 连接线束组件 (10) 。 连接软管组件 (11) 。
Show/hide table
 | |
| 图 4 | g03340578 |
注: 此图表仅供参考。
- 将软管组件 (8) 和 (9) 连接至后车桥组件 (7) 。
Show/hide table
 | |
| 图 5 | g01643876 |
- 将软管组件 (6) 连接到后车桥组件 (7) 。
Show/hide table
 | |
| 图 6 | g01643875 |
- 安装新螺栓 (5) 以连接后驱动轴 (4) 。 用 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩拧紧螺栓 (5) 。
Show/hide table
 | |
| 图 7 | g01643874 |
- 连接停车制动器电缆组件 (1) 。 安装销 (2) 。 安装夹子 (3) 。
Show/hide table
 | |
| 图 8 | g01643873 |
- 安装后轮胎和轮缘。 请参考拆解和组装, "轮胎和轮缘（后） - 拆卸和安装"。
- 提升机器后部。 拆下工具 (A) 。 将机器降至地面上。
Show/hide table
 | |
| 图 9 | g03340583 |
注: 典型示例。
- 排出制动器的空气。 参考测试和调整手册, "制动系统空气 - 排放"。
Caterpillar Information System:
Cat® Detect Object Detection System Event Codes
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Rear Axle - Remove
2013/01/24 New ECM Shock Isolator Mounts are Used for C175 Engines {1408, 1901, 7553}
793F Off-Highway Truck Field Assembly Power Train - Install - Extended Life
2013/02/04 A New Spacer for the Rear Fender Group is Now Used on Certain Motor Graders {7252}
797B Off-Highway Truck Fan Drive Hydraulic System Bypass Switch (Steering/Fan Drive Oil Filter)
793F Off-Highway Truck Field Assembly Exhaust - Install - Standard
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Instrument Panel (Lower) - Remove and Install
Procedure to Update Steering Sensor Hardware and Software for the CD54 Asphalt Compactor{1408, 430S, 7620} Procedure to Update Steering Sensor Hardware and Software for the CD54 Asphalt Compactor{1408, 430S, 7620}
Procedure for Replacing Limit Switch As Used on Certain Cat® Products{1435} Procedure for Replacing Limit Switch As Used on Certain Cat® Products{1435}
2570C and 2670C Wheel Feller Bunchers Fuel Tank Water and Sediment - Drain
797 Off-Highway Truck Fan Drive Hydraulic System Makeup Valve (Fan Motor)
AP300D Asphalt Paver Machine Systems Hydraulic Tank
AP300D Asphalt Paver Machine Systems Metering Pump (Steering)
AP300D Asphalt Paver Machine Systems Operator Console
797B Off-Highway Truck Fan Drive Hydraulic System Pressure Reducing Valve (Fan Drive)
Cat® Detect Object Detection System Configuration Screen
Cat® Detect Object Detection System General Information
Cat® Detect Object Detection System Main Screen
Cat® Detect Object Detection System Display
3512B and 3512C Petroleum Generator Set Engines Cover Group (Front Housing)
Command for Underground Operations Area Map - Configure - Manage
AD45B Underground Articulated Truck Machine Systems Diverter Valve (Secondary Steering) - Disassemble
2013/02/19 Improved Limit Switch Sensors Are Now Used on Certain Cold Planers {1435}