 | |
| Illustration 1 | g03228237 |
"Device Information" page | |
The "Device Information" page allows office personnel to view status information about the device. The information is available in real time. Refer to Illustration 1.
The "Device Information" page displays data in the following sections:
- "General"
- "Device TCP/IP"
- "TMAC Server"
- "GPS Correction"
- "GPS Position"
Note: The "DEVICE" page is the default home page when connecting to the web interface through a web browser.
"General"
The "General" section displays the following information:
"Product Name" - This text is the name of the Caterpillar software that is flashed on the device.
"Software Version" - This value is the version of the health interface module software that is flashed on the device.
"Software Part Number" - This value is the part number for the software that is flashed on the device.
"Configuration File Part Number" - This value is the part number of the configuration file that is currently loaded on the device.
"Hardware Part Number" - This value is the part number of the ECM.
"ECM Serial Number" - This value is the serial number of the ECM.
"Device ID" - This value is the user configured ID of the health interface module. The device ID is configured in the "Configuration" menu.
"UTC Time" - This data is the current date and Universal Time Coordinated (UTC) time.
"Local Time" - This data is the current date and local time on the health interface module.
"Service Hours" - This data is total number of hours that the device has been running since the installation of the health interface module.
"Uptime Hours" - This data is the total amount of operation time for the device since the last reboot of the device. The format is "hh:mm:ss".
"Device TCP/IP"
The "Device TCP/IP" section displays the following information:
"IP Address" - This value is the Internet Protocol (IP) address of the health interface module. The IP address may be manually configured or the IP address may be automatically acquired. The IP address is set in the "Configuration" menu.
"Subnet Mask" - This value is the subnet masks of the health interface module. The subnet mask is entered through the "Configuration" menu.
"Gateway" - This value is the gateway of the health interface module. The gateway value is entered in the "Configuration" menu.
"TMAC Server"
The "TMAC Server" section provides information about the TMAC server settings. The following information is displayed:
"IP Address" - This value is the IP address that is configured for the TMAC server used for communication with Cat MineStar System.
"Port Number" - This value is the port number that is configured for the TMAC server used for communication with Cat MineStar System.
"Ping Status" - This information is the status of the TMAC ping command sent to the office. The following three values are possible: "Disabled", "Reachable", or "Not Reachable".
"GPS Corrections"
The "GPS Corrections" section provides information on the receipt of GNSS corrections from a base station. The GNSS corrections are sent over the Wireless Local Area Network (WLAN). These corrections are necessary in order to provide GNSS accuracy.
The "GPS Corrections" section displays the following information:
"Port Number" - This value is the UDP port that is configured to listen for GPS corrections.
Correction Type - This data is the type of GPS correction that is received from the base station. The following types of corrections are possible: CMR, CMR+, CMRx, RTCMv3, RTCMv4, and "Unknown".
"Availability (1 Min.)" - This value indicates the percentage of time within the previous minute that the health interface module was receiving corrections. If the value is "100%", then corrections have been received for the previous minute. If the value is "0", then no corrections were received over the previous minute.
"Availability (10 Min.)" - This value indicates the percentage of time within the previous 10 minutes that the health interface module was receiving corrections. If the value is "100%", then corrections have been received for the previous 10 minutes. If the value is "0", then no corrections were received over the previous 10 minutes.
"Availability (60 Min.)" - This value indicates the percentage of time within the previous 60 minutes that the health interface module was receiving corrections. If the value is "100%", then corrections have been received for the previous 60 minutes. If the value is "0", then no corrections were received over the previous 60 minutes.
"GPS Position"
The "GPS Position" section provides information about GPS positioning that is reported by the satellite receiver. Information about the accuracy status of the GPS signal is also provided in this section. Refer to the "GPS Position Information" in the "GPS Menu" section for information about each item.