Cab - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 140-7742     | 套筒     | 2     |
B     | 421-5661     | 吊耳组件     | 2     |
- 将工具 (A) 、工具 (B) 和适当的起吊设备连接到驾驶室 (91) 上。 驾驶室 (91) 的重量约为 907 kg (2000 lb)。 安置驾驶室 (91) 。
Show/hide table
图 1 | g03288244 |
- 安装螺栓 (93) 。 对另一侧重复上述步骤。
Show/hide table
图 2 | g03288376 |
- 安装螺母 (92) 。 对另一侧重复上述步骤。
Show/hide table
图 3 | g03288337 |
- 定位监视器组件 (88) 和线束组件 (89) 。 安装螺母 (87) 和系带 (90) 。
Show/hide table
图 4 | g03287056 |
- 放置好线束组件 (86) 。 安装螺栓 (85) 。
Show/hide table
图 5 | g03287036 |
- 连接线束组件 (83) 和接地电缆带 (81) 。 安装夹子 (84) ,然后连接电缆组件 (82) 。
Show/hide table
图 6 | g03286980 |
- 安装护罩 (79) 和螺栓 (80) 。
Show/hide table
图 7 | g03286979 |
- 安装护罩 (77) 和螺栓 (78) 。
Show/hide table
图 8 | g03286978 |
- 连接电缆组件 (76) 。
Show/hide table
图 9 | g03286977 |
- 安装车顶盖 (75) 和螺栓 (74) 。
Show/hide table
图 10 | g03340679 |
- 连接线束组件 (73) 。 在机器另一侧重复这些步骤。
Show/hide table
图 11 | g03340677 |
机械控制
- 重新定位杆组件 (72) 并安装销 (71) 。 连接线束组件 (70) 。
Show/hide table
图 12 | g03286918 |
- 安装隔套 (67) 和销 (66) 。
Show/hide table
图 13 | g03340671 |
- 用手拧紧联接套筒 (64) ,直到联接套筒 (64) 与阀面紧密配合,然后拧紧螺母 (68) 。 安装螺栓 (15 ) 。
- 松开螺栓 (65) 和螺母 (68) 。
- 旋转联接套筒 (64) 上/下电缆组件 (69) ,将稳定器控制杆对准空档位置。
- 拧紧螺栓 (65) 。
- 将螺母 (68) 拧紧至 23 ± 1 N·m (204 ± 9 lb ft) 的扭矩。
- 检查稳定器控制杆 (13) 以确保稳定器控制杆 (13) 能够自由移动。
- 重复步骤 3 到步骤 8 以实现预期效果。
- 安装电缆组件 (63) 。
Show/hide table
图 14 | g03286844 |
- 松开螺栓 (65) 和螺母 (68) 。
- 旋转联接套筒 (64) 上/下电缆组件 (69) ,将稳定器控制杆对准空档位置。
- 安装面板 (62) 。
Show/hide table
图 15 | g03286840 |
- 安装螺栓 (61) 和支架组件。 连接夹子 (59) 。 将杆组件 (60) 安装到阀组 (53) 中。
Show/hide table
图 16 | g03286838 |
- 连接连杆 (56) 。 安装踏板组件 (58) 和螺栓 (57) 。 在另一侧重复这些步骤。
Show/hide table
图 17 | g03286797 |
先导控制
- 连接线束组件 (55) 。
Show/hide table
图 18 | g03286737 |
Show/hide table
图 19 | g03285918 |
- 从挖掘机阀组 (53) 的侧面连接四个软管组件 (54) 。 从挖掘机阀组 (53) 的顶部连接六个线束组件 (51) 。 从挖掘机阀组 (53) 的顶部连接八个线束组件 (52) 。
- 连接线束组件 (50) 。 连接软管组件 (49) 。
Show/hide table
图 20 | g03285436 |
- 安装地板 (48) 。 安装面板 (47) 。
Show/hide table
图 21 | g03285736 |
- 安装壳体 (45) 和螺栓 (46) 。 安装螺栓 (44) 。 在另一侧重复这些步骤。
Show/hide table
图 22 | g02977582 |
Show/hide table
图 23 | g02977583 |
- 安装百叶 (43) 。
Show/hide table
图 24 | g02977579 |
- 安装面板 (42) 和螺栓 (41) 。
Show/hide table
图 25 | g03285877 |
- 将停车制动器电缆组件 (39) 连接到停车制动器操纵杆组件 (40) 上。
Show/hide table
图 26 | g03285727 |
- 安装销 (38) 和开口销 (37) 。
Show/hide table
图 27 | g03285724 |
- 安装盖 (36) 。
Show/hide table
图 28 | g03285719 |
- 安装夹子 (34) 和螺栓 (33) 。
Show/hide table
图 29 | g03285400 |
- 放置排气延长管 (32) 。 安装螺栓 (31) 。
Show/hide table
图 30 | g03288226 |
注: 典型示例。
- 连接线束组件 (30) 。
Show/hide table
图 31 | g03285396 |
- 从转向计量阀 (24) 中连接软管组件 (25) 、 (26) 、 (27) 和 (28) 。 连接软管 (29) 。
Show/hide table
图 32 | g03285357 |
注: 可能需要重新放置转向柱以连接所有软管。
- 连接软管组件 (19) 、 (20) 、 (21) 和 (22) 。 安装板 (23) 。
Show/hide table
图 33 | g03285016 |
- 定位电缆组件 (17) 。 拧紧锁紧螺母 (18)
Show/hide table
图 34 | g03284999 |
- 连接线束组件 (16) 。 安装夹子 (15) 。
Show/hide table
图 35 | g03284997 |
- 安装所有地板 (14) 。
Show/hide table
图 36 | g03284977 |
- 安装面板 (12) 。 安装螺栓 (11) 和 (13) 。 安装螺栓 (9) 和 (10) 。
Show/hide table
图 37 | g03284963 |
Show/hide table
图 38 | g03284961 |
- 将面板 (7) 和 (8) 安装到转向柱上。 安装螺栓 (5) 和 (6) 。
Show/hide table
图 39 | g03284939 |
Show/hide table
图 40 | g03284938 |
Show/hide table
图 41 | g03284936 |
- 安装地板垫 (2) 。 安装板 (3) 和螺栓 (4) 。 对另一侧重复上述步骤。
Show/hide table
图 42 | g02968137 |
- 将蓄电池断路开关 (1) 转到接通(ON)位置。
Show/hide table
图 43 | g03210616 |
注: 图片仅供参考。
- 加注空调系统。 请参阅维修手册, SENR5664, "使用 R-134a 制冷剂的空调与暖风系统",了解相关正确步骤。 有关正确的工具,请参阅专门出版物, NEDG2500, "空调工具"。
Caterpillar Information System:
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Cab - Remove
MH3049 Material Handler Hydraulic System Electronic Control (Fan Hydraulic System)
450F Backhoe Loader Hydraulic and Steering System Worksheets - Troubleshoot
450F Backhoe Loader Hydraulic and Steering System Ride Control Accumulator - Test and Charge
450F Backhoe Loader Machine Systems Lift Arms - Install
450F Backhoe Loader Hydraulic and Steering System Gear Pump (Implement) - Supplemental
MH3049 Material Handler Hydraulic System Check Valve (Return Makeup)
450F Backhoe Loader Hydraulic and Steering System Hydraulic Tank and Filter
450F Backhoe Loader Machine Systems Lift Arms - Remove
770G and 772G Off-Highway Truck/Tractors Backlight Is On Continuously
450F Backhoe Loader Machine Systems Multipurpose Bucket - Remove and Install
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Safety Messages
770G and 772G Off-Highway Truck/Tractors Electrical Connector - Inspect
770G and 772G Off-Highway Truck/Tractors ECM Software - Install
770G and 772G Off-Highway Truck/Tractors ECM - Configure
770G and 772G Off-Highway Truck/Tractors ECM - Replace
450F Backhoe Loader Hydraulic and Steering System General Information (Hydraulic System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Pump Backup)
R3000H Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Disassemble
R3000H Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Assemble
R3000H Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Install
R3000H Load Haul Dump Machine Systems Brake Control Valve (Service) - Remove
R3000H Load Haul Dump Machine Systems Brake Control Valve (Service) - Install
R3000H Load Haul Dump Machine Systems Brake Control Valve (Parking) - Remove and Install