New Seat Belt Group Increases Operator Comfort{7327,7312}
Usage:
All Models Using Seat Belts Listed In Article
Description of Change: A new swing lock seat belt is used in all models. The new seat belt is easy to adjust and maintain its adjusted length. The seat belt incorporates plastic slides on each half of the belt assembly. The slides adjust and hold the length of the belt.
Adaptable To: The new seat belt groups are direct replacements for the former seat belt groups. The chart identifies the new and former seat belt groups.
Caterpillar Information System:
1990/07/02 What's Your Answer? {0113,5050}
1990/07/02 Magnetic Pins Available To Measure Spline Wear {5070,0762,0763,5058}
1990/07/02 Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02 New Spark Plug Seal Used {1555}
1990/07/02 Procedure To Measure Cylinder Liner Projection On 3176 Truck Engines {1216}
1990/07/02 New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02 Engine Rack Control Assemblies Improved {1257}
1990/07/02 Answers To Quiz In This Issue {0113,5050}
1990/07/02 Availability Of Replacement SR4 Generators {4450}
1990/07/02 Electrical System Damage From High Voltage {1400,1401,1405,1410,1453}
1990/06/25 New Jacket Water Heater Groups Have New Thermostat{1355,1383}
1990/06/25 New Water Regulator Prevents Leakage{1355,1393}
1990/07/09 Solenoid Contacts May Corrode In 3T2648 Marine Starting Motor Group{1467,1453}
1990/07/23 Troubleshooting Forward Warning Horns That Will Not Work{7402}
1990/07/23 Dimensions For Aluminum Washer{1221}
1990/07/23 Powdered Metal Valve Guides Provide Increased Service Life{1104}
1990/07/23 Improved Turbocharger Bearing Kit Available For Parts Service{1053}
1990/07/23 Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks{7422,1354}
1990/07/23 Bearing Information For SR 4 Generators{4471}
1990/07/30 New Pistons Used{1225,1214}
1990/07/30 New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/08/06 Coolant Loss In 3406B Truck Engines{1395,1355,1100,1124,1353,1216}
1990/08/06 New Rotary Solenoid (Brushless Torque Motor) Used In PEEC Engines{1909}
1990/08/06 Rotor Shaft Length Changed{4457,4472}