1990/07/23 Caterpillar


Improved Turbocharger Bearing Kit Available For Parts Service{1053}

Usage:


G342C, G333C, 3306, G379A, G353D, G398A, G399 Spark-Ignited Engines

An improved 1P5467 Turbocharger Bearing Kit (same part number) is available for parts service. The former kit allowed the center feed oil supply to treat the bearings as pistons, pushing them apart and causing the ends to wear. The improved bearing kit contains two grooved bearings. The bearings allow oil to flow at an increased rate to the thrust plate thus reducing temperatures and carbon formation in the center housing. This change will provide longer bearing service life.

Caterpillar Information System:

1990/07/23 Powdered Metal Valve Guides Provide Increased Service Life{1104}
1990/07/23 Dimensions For Aluminum Washer{1221}
1990/07/23 Troubleshooting Forward Warning Horns That Will Not Work{7402}
1990/07/09 Solenoid Contacts May Corrode In 3T2648 Marine Starting Motor Group{1467,1453}
1990/07/09 New Seat Belt Group Increases Operator Comfort{7327,7312}
1990/07/02 What's Your Answer? {0113,5050}
1990/07/02 Magnetic Pins Available To Measure Spline Wear {5070,0762,0763,5058}
1990/07/02 Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02 New Spark Plug Seal Used {1555}
1990/07/02 Procedure To Measure Cylinder Liner Projection On 3176 Truck Engines {1216}
1990/07/02 New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02 Engine Rack Control Assemblies Improved {1257}
1990/07/23 Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks{7422,1354}
1990/07/23 Bearing Information For SR 4 Generators{4471}
1990/07/30 New Pistons Used{1225,1214}
1990/07/30 New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/08/06 Coolant Loss In 3406B Truck Engines{1395,1355,1100,1124,1353,1216}
1990/08/06 New Rotary Solenoid (Brushless Torque Motor) Used In PEEC Engines{1909}
1990/08/06 Rotor Shaft Length Changed{4457,4472}
1990/08/06 New Caterpillar Parts Identification Label{7567}
1990/08/13 Spacer Available To Eliminate Cracks On Ignition Coil Mounting Bracket{1554}
1990/08/13 Effective Dates, Serial Numbers And Features OF PEEC Personality Modules{1900,1902}
1990/08/13 Changes To Exhaust Manifold Expansion Sleeves And Bolts{1059}
1990/08/13 Stronger Fan Guard Resists Vibration Damage{1360}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.