Rear Axle - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7498 | 支撑支座组件 | 2 |
| B | 1U-7505 | 液压千斤顶 | 1 |
- 松开凸缘螺母 (1) 。 此时不要拆下凸缘螺母 (1) 。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 1 | g01260063 |
- 提升机器后部。 如图所示，安装工具 (A) 。 将机器降下至工具 (A) 上。
Show/hide table
 | |
| 图 2 | g03094858 |
- 释放系统压力。
- 将后轮胎和轮缘 (2) 固定到合适的电力车上。 拆下凸缘螺母 (1) （未显示）。 使用适当的电力车拆下后轮胎和轮缘 (2) 。 后轮胎和轮缘 (2) 的重量约为 163 kg (360 lb)。 对机器的另一侧重复此步骤。
Show/hide table
 | |
| 图 3 | g02920158 |
- 拆下夹子 (3) 。 拆下销 (5) 。 断开停车制动器电缆组件 (4) 并将停车制动器电缆组件 (4) 放在一旁。
Show/hide table
 | |
| 图 4 | g02920257 |
- 拆下螺栓 (7) 并弃置螺栓 (7) 。 断开后驱动轴 (6) 。
Show/hide table
 | |
| 图 5 | g02920276 |
- 将软管组件 (8) 从后车桥组件 (9) 上断开。
Show/hide table
 | |
| 图 6 | g02920296 |
- 将软管组件 (10) 和 (11) 从后车桥组件 (9) 上断开。
Show/hide table
 | |
| 图 7 | g02920298 |
- 用适当的链条将后车桥组件 (9) 固定到工具 (B) 上。 后车桥组件 (9) 的重量约为 545 kg (1200 lb)。
Show/hide table
 | |
| 图 8 | g02920301 |
Show/hide table
 | |
| 图 9 | g03110716 |
Show/hide table
 | |
| 图 10 | g02920316 |
- 拆下盖 (12) 。 对于另一侧，重复本步骤。
- 拆下螺栓 (13) 后拆下后车桥组件 (9) 。
Caterpillar Information System:
C175-16 Engines for Off-Highway Truck/Tractors Coolant Pressure Is Low
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F and 450F Backhoe Loaders Monitoring System Module - Configure
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Transmission - Standard Shift
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
C175-16 Locomotive Engine Electronic Service Tool Does Not Communicate
2012/03/07 VIMSpc 2011A Update Utility Is Now Available for Certain CAT Products {7601}
C3.4B Engines Crankcase Breather Ejects Oil
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
450F Backhoe Loader Power Train Transmission (Power Shift) - Install
2012/03/21 A New Front Window Wiper Motor Group Is Now Used on 24M Motor Graders {7305}
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Relief Valve (Charge) - Test and Adjust
Signature Tests for Certain 789B And 793B Off-Highway Trucks{7601} Signature Tests for Certain 789B And 793B Off-Highway Trucks{7601}
Signature Tests for Certain 797B Off-Highway Trucks{7601} Signature Tests for Certain 797B Off-Highway Trucks{7601}
C3.8 Engines for Caterpillar Built Machines Electrical System
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Rear Axle - Install
3516B Generator Set Engines with Dynamic Gas Blending Symptom Troubleshooting
586C LRC Site Prep Tractor Indicators and Gauges - Test
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Parking Brake - Remove and Install
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Contains Fuel
770G and 772G OEM Off-Highway Truck Chassis Specifications
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
2012/07/11 A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}