Measure Menu
The "Measure" menu consists of the following submenu:
- "Right Joystick"
- "Left Joystick"
- "Keypad"
- "Front Valve"
- "Machine Sensors and Switches"
- "Front Manifold"
- "Mid Manifold"
- "Propel"
- "Brake Pedal"
- "Saw Speed Press"
- "Cylinder Test"
- "Fan Control"
Each submenu lists measurable functions or channels as well as the current output of each channel.
 | |
| Illustration 1 | g02494376 |
Main menu | |
Select "F2" in order to display the measure submenu.
 | |
| Illustration 2 | g02637416 |
Submenu | |
 | |
| Illustration 3 | g02824258 |
Submenu Continued | |
Right Joystick
 | |
| Illustration 4 | g02719803 |
Right Joystick Measure Menu | |
The right joystick measure menu consists of the following:
- Right Joystick Tilt Arm (MAC) Percent
- Right Joystick Lift Arm (MAC) Percent
- Right Joystick Button 2 (PIN) Value
- Right Joystick Button 3 (PIN) Value
- Right Joystick Button 6 (PIN) Value
- Right Joystick Button 7 (PIN) Value
- Right Joystick Button 8 (PIN) Value
Right JS Tilt Arm (MAC) - This parameter monitors the right and left position of the right joystick.
Right JS Lift Arm (MAC) - This parameter monitors the fore and aft position of the right joystick.
Right JS Button 2 (PIN) - This parameter monitors the bunch close switch.
Right JS Button 3 (PIN) - This parameter monitors the bunch open switch.
Right JS Button 6 (PIN) - This parameter monitors the side-cut switch. This switch is only active on machines that are equipped with a felling head with the side-cut option.
Right JS Button 7 (PIN) - This parameter monitors propel reverse switch. This switch is only active on machines with the one-pedal option.
Right JS Trigger 8 (PIN) - This parameter monitors the front differential lock switch.
Note: The "F2" key allows for toggling between raw values and scaled values.
Left Joystick
 | |
| Illustration 5 | g02719900 |
Left Joystick Measure Menu | |
The left joystick measure menu consists of the following:
- Left Joystick Steering (MAC) Percent
- Left Joystick Button 2 (PIN) Value
- Left Joystick Button 3 (PIN) Value
- Left Joystick Button 7 (PIN) Value
- Left Joystick Button 8 (PIN) Value
Left JS Steer (MAC) - This parameter monitors the right and left position of the left joystick.
Left JS Button 2 (PIN) - This parameter monitors the gather-close switch.
Left JS Button 3 (PIN) - This parameter monitors the gather-open switch.
Left JS Button 7 (PIN) - This parameter monitors the propel override switch.
Left JS Trigger 8 (PIN) - This parameter monitors the all-open switch.
Note: The "F2" key allows for toggling between raw values and scaled values.
Note: The pin number and the connector number are useful for troubleshooting. The pin number and connector number will help to determine the electrical connector and the wire that is involved.
Keypad
 | |
| Illustration 6 | g02860716 |
Keypad Measure Menu | |
 | |
| Illustration 7 | g02860718 |
Keypad Measure Menu | |
The keypad measure menu consists of the following:
- SW1-Rev Fan (IDC)
- SW2-Park Brake (IDC)
- SW3-Attach On (IDC)
- SW4-Arm SW (IDC)
- SW5-Throttle Down (IDC)
- SW6-Throttle Up (IDC)
- SW9-Flood Rear (IDC)
- SW10-Flood Front (IDC)
- SW11-Diff Lock Rear (IDC)
- SW12-Rabbit (IDC)
- SW14-Horn (IDC)
The functions that are displayed on this screen are internal digital channels. The values for these channels are "True" or "False".
Front Valve
 | |
| Illustration 8 | g02637976 |
Front Valve Measure Menu | |
The front valve measure menu consists of the following:
- SW6-Attach On (COUT) Value
- Left Joystick Steer (COUT) Value
- Lift Arm (COUT) Value
- Tilt Arm (COUT) Value
- Gather Open (DOUT)
- Gather Close (DOUT)
- Bunch Finger Open (DOUT)
- Bunch Finger Close (DOUT)
- Side Cut (DOUT)
SW6–Attach On (COUT) - This parameter shows the output signal to the attachment forward solenoid.
Left JS Steer (COUT) - This parameter shows the output signal to the steering solenoids.
Lift Arm (COUT) - This parameter shows the output signal to the lift and lower solenoids.
Tilt Arm (COUT) - This parameter shows the output signal to the tilt solenoids.
The remaining functions that are displayed on this screen are digital out channels. The values for these channels are "True" or "False".
Note: The "F2" key allows for toggling between raw values and scaled values.
Machine Sensors and Switches
 | |
| Illustration 9 | g02719905 |
Machine Sensors and Switches Measure Menu | |
 | |
| Illustration 10 | g02719906 |
Machine Sensors and Switches Measure Menu | |
The machine sensors and switches measure menu consists of the following:
- Aux Pump Press (VIN)
- Attach Pump Press (VIN)
- Service Brake Sensor (VIN) Percent
- Propel FWD A (VIN) Percent
- Propel FWD B (VIN) Percent
- Propel REV A (VIN) Percent
- Propel REV B (VIN) Percent
- Fuel Level Sw (VIN) Percent
- Door Sw (DIN)
- Charge Filter SW (DIN)
- Return Filter SW 1 (DIN)
- Hydraulic Oil Low (DIN)
- Flood Front (DOUT)
- Flood Rear (DOUT)
- Horn (DOUT)
Attachment Pump Pressure (VIN) - This parameter is the input from the pressure sensor in the attachment hydraulic circuit.
Auxiliary Pump Pressure (VIN) - This parameter is the input from the pressure sensor in the implement hydraulic circuit.
Service Brake Sensor (VIN) - This parameter is the scaled input from the service brake sensor.
Propel FWD A Sensor (VIN) and Propel FWD B (VIN) - These parameters scale the two input signals from the propulsion forward sensor.
Propel REV A Sensor (VIN) and Propel REV B (VIN) - These parameters scale the two input signals from the propulsion reverse sensor.
Fuel Level Sw (VIN) - This parameter is the input from the fuel level sensor.
The remaining functions that are displayed on this screen are digital in and digital out channels. The values for these channels are "True" or "False".
Note: The "F2" key allows for toggling between raw values and scaled values.
Front Manifold
 | |
| Illustration 11 | g02638503 |
Front Manifold Measure Menu | |
The front manifold measure screen consists of the following:
- Front Differential Lock (COUT) Value
- Parking Brake (COUT) Value
- Parking Brake Press (DIN)
- Accum Press (DIN)
- Service Brake (COUT) Value
- Service Brake Sensor (VIN) Percent
- Service Brake (MAC) Percent
Front Differential Lock (COUT) - This parameter shows the output signal to the front differential lock solenoid.
Parking Brake (COUT) - This parameter shows the output signal to the parking brake solenoid.
Parking Brake Press (DIN) - The parking brake pressure switch provides the input signal for this parameter.
Accum Press (DIN) - The accumulator pressure switch provides the input signal for this parameter.
Service Brake (COUT) - This parameter shows the output signal that is sent to the service brake solenoid.
Service Brake Sensor (VIN) - This parameter shows the input signal from the service brake sensor.
Service Brake (MAC) - This parameter determines the magnitude of the COUT parameter.
Some of the functions that are displayed on this screen are digital in channels. The values for these channels are "True" or "False".
Note: The "F2" key allows for toggling between raw values and scaled values.
Mid Manifold
 | |
| Illustration 12 | g02639216 |
Mid Manifold Measure Screen | |
The mid manifold measure screen consists of the following:
- Arm Attach Pump (MAC) Percent
- Arm Attach Pump (COUT) Value
- Differential Lock Rear (COUT) Value
- Arm Aux Press (DOUT)
Arm Attach Pump (MAC) - This parameter shows the percent of the maximum output signal that is currently being sent to the attachment pump solenoid.
Arm Attach Pump (COUT) - This parameter shows the actual value of the signal being sent to the attachment pump solenoid.
Differential Lock Rear (COUT) - This parameter shows the output signal to the rear differential lock solenoid.
Arm Aux Press (DOUT) - This parameter indicates if a signal is being sent to the implement pump solenoid.
Some of the functions that are displayed on this screen are digital out channels. The values for these channels are "True" or "False".
Note: The "F2" key allows for toggling between raw values and scaled values.
Propel
 | |
| Illustration 13 | g02860819 |
Propel Measure Screen | |
 | |
| Illustration 14 | g02860821 |
Propel Measure Screen Continued | |
 | |
| Illustration 15 | g02860823 |
Propel Measure Screen Continued | |
The propel measure screen consists of the following:
- Propel (COUT) Value
- Propel FWD A (VIN) Percent
- Propel FWD B (VIN) Percent
- Propel REV A (VIN) Percent
- Propel REV B (VIN) Percent
- Total Arming (FGI) Value
- SW2 Parking Brake (IDC) Value
- Propel FWD (MAC) Percent
- Propel REV (MAC) Percent
- Propel Control (SP) Value
- Propel Motor (MAC) Percent
- Propel Motor (COUT) Value
- Propel (DMAC) Percent
- Propel Droop Value (FP)
- Droop Filter (FP) Value
- Service Brake (MAC) Percent
- Engine Throttle (MAC) Percent
- Saw Speed (FIN) RPM
- Saw Gear Tach (MAC) Percent
- Engine Speed RPM
Some of the functions that are displayed on this screen are digital out or internal digital channels. The values for these channels are "True" or "False".
Note: The "F2" key allows for toggling between raw values and scaled values.
Brake Pedal
 | |
| Illustration 16 | g02862418 |
Brake Pedal Measure Screen | |
The brake pedal measure screen consists of the following:
- Service Brake Sensor (VIN) Percent
- Service Brake (COUT) Value
- Service Brake (MAC) Percent
- Engine Speed RPM
- Propel (COUT) Value
- Engine Overspeed Low (FP)
- Engine Brake Low (FP)
- Engine Overspeed High (FP)
- Engine Brake High (FP)
Note: The "F2" key allows for toggling between raw values and scaled values.
Saw Speed Pressure
 | |
| Illustration 17 | g02824542 |
Saw Speed Pressure Measure Screen | |
 | |
| Illustration 18 | g02824544 |
Saw Speed Pressure Measure Screen Continued | |
The saw speed pressure measure screen consists of the following:
- Saw Speed (FIN) RPM
- Attach Pump Press (VIN) PSI
- Attach Pump Press (MAC) PSI
- SW6 Attach On (MAC) Percent
- SW6 Attach On (COUT) Value
- Arm Attach Pump (MAC) Percent
- Arm Attach Pump (COUT) Value
- Engine Speed RPM
- High Flow (SMC)
- Pressure (SMC)
- Saw Gear Tach (MAC)
- Saw Speed Command (FP)
- Engine/Throttle (MAC)
Note: The "F2" key allows for toggling between raw values and scaled values.
Cylinder Test
 | |
| Illustration 19 | g02824557 |
Cylinder Test Measure Screen | |
The cylinder test measure screen consists of the following:
- Left Joystick Steer (COUT) Value
- Tilt Arm (COUT) Value
- Lift Arm (COUT) Value
- Aux Pump Press (MAC)
- Aux Pump Press (VIN)
Note: The "F2" key allows for toggling between raw values and scaled values.
Fan Control
 | |
| Illustration 20 | g02824562 |
 | |
| Illustration 21 | g02824563 |
The fan control screen consists of the following:
- Fan Control (SMC)
- Fan Control (MAC)
- Fan Control (COUT)
- Fan Cycle (TMR)
- Fan Rev (DOUT)
- Fan Demand (MR)
- Fan Memorizing % (MAC)
- IMT (F) (FGI)
- Hydraulic Oil Temp (F) (FGI)
- Coolant Temp (F) (FGI)
Note: The "F2" key allows for toggling between raw values and scaled values.