Metering Pump (Steering) - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | FT-1114 | Vacuum Cap | 1 |
- Install Tooling (A) onto the steering tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system.
Show/hide table
Illustration 2 g02824318 - Remove cover assembly (1).
Show/hide table
Illustration 3 g02824383 - Disconnect hose assemblies (2). Remove metering pump (3).
Show/hide table
| |
| Illustration 1 | g01313838 |
- Install metering pump (3) in the reverse order of removal.
Caterpillar Information System:
553C Wheel Feller Buncher Fuses - Replace
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Show Logs
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Assemble - C3.3B Tier 4 Interim/Stage 3A
359-3896 Lifting Bracket Group{0599, 0629, 1122, 7000, 7156, 7505} 359-3896 Lifting Bracket Group{0599, 0629, 1122, 7000, 7156, 7505}
C15 and C18 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install
Product Identification Numbers (PIN) Location Guide Cold Planer
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
440 and 450 Backhoe Loader Daily Inspection
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Product Identification Numbers (PIN) Location Guide Forest Machine
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Show Module Information
3500B Engines for Caterpillar Built Power Modules Cylinder Head
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
553C, 563C and 573C Wheel Feller Bunchers IQAN Monitoring ; Control System Description of Measure Screens
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders System Schematic
553C Wheel Feller Buncher Reference Material
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
773G and 775G OFF-Highway Trucks Machine Systems Brake Valve and Mounting (Parking) - Remove and Install
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606} The Product Link Antenna for Certain M and M Series 2 Motor Graders Will be Secured for Transport to Prevent Damage to the Antenna{7606}
Product Identification Numbers (PIN) Location Guide Compactor (Pneumatic)